Before we get started you'll need to remove the panels of your X58. Make sure the machine is unplugged and allow it to fully cool off. Tools Needed: Adjustable wrench x2 (or a wrench & a vice grip) 6mm Allen hex key Teflon tape Zip ties Hot water...
Tools Needed:- 17mm crescent wrench x 2- 17mm deep socket and ratcheting wrench- Philips head screw driver- Molykote lubricant 1. Start by removing the panels from the machine.2. Use the 17mm crescent wrench to unscrew the brass compression...
Before testing, please unplug your machine and allow it to completely cool and depressurize. Then you will remove the panels of your machine. Tools needed: Phillips head screwdriver 17mm wrench Scotch-Brite scouring pad Cafiza cleaning solution...
Before servicing, please unplug your machine and allow it to cool and depressurize. Then, you will need to remove the panels. Tools needed: Phillips head screwdriver 13mm crescent wrench 1. The first thing you will need to do is disconnect the...
Tools Needed:- Philips head screw driver- Flat-head screwdriver- Long tweezers or pliers-Molykote -Portafilter with blank basketParts Needed:Replacement expansion valve seat gasketRemove the panels from the machine.1. The expansion valve is...
Tools needed: - Philips head screwdriver - small flat head screwdriver 1. Remove the panels. 2. Locate the PID - (same side as the steam wand) 3. Remove the screws that hold the PID to the frame: 4. Take a photo - or use this photo for reference -...