Before doing this you will need to remove the panels from your machine so you have access into the back of the machine: Pro 300 Panel Removal Pro 500 Panel Removal Pro 700 Panel Removal Classika Panel Removal Synchronika Panel Removal If you need...
Tools Needed: 2.5mm Allen Wrench 3mm Allen Wrench 2x Adjustable Wrench 1. Remove the panels of the Pro 300. 2. Remove the water tank sleeve by removing the 2 screws circled here and then moving the water tank sleeve to the side, allowing access to...
Tools Needed: 14mm Wrench 15mm Wrench 17mm Wrench Adjustable Wrench 2.5mm Allen Wrench 3mm Allen Wrench 1. Remove the panels of the machine: Pro 300 Panel Removal 2. Remove the hose and 14mm fitting from the flow path. 3. Hold the elbow fitting...
Tools Needed: 2.5mm & 3mm Allen keys 13mm & 14mm Open-ended wrenches Adjustable wrench 1. Remove the panels of the Pro 300. Instructions for this are listed here: Pro 300 Panel Removal Instructions. 2. Remove the capillary tube first, then the...
Before doing this we recommend allowing your machine to fully cool off and unplugging the machine. Tools needed: 2.5mm allen key 3mm allen key Adjustable wrench Needle-nose Pliers 1) Remove the panels of your Pro 300 2) Locate the power switch...
Tools needed: 2.5mm allen key 3mm allen key 17mm wrench Scotch-Brite scouring pad Cafiza cleaning solution Teflon tape Part if needed: Pro 300 Temperature Probe Before testing, please drain your machine, unplug it from the outlet and allow it to...
Tools Needed:- 2.5mm Allen wrench or hex driver- Flathead screwdriver- Cafiza + hot water- Replacement Expansion Valve Seat (Red cap)NOTE: The machine should be unplugged and cool to the touch before you begin.1) Start by removing the top panel...
Tools Needed:- 15mm crescent wrenchOR- 15mm deep socket and socket wrench- Scotch-Brite pad- Replacement 1/4" Safety ValveNOTE: The machine should be unplugged and cool to the touch before you begin.1) First, you will need to remove the top panel...
Tools Needed:- 14mm crescent wrench- Adjustable wrench- #2 Philips screw driver- Scotch-Brite pad1) First, you will need to drain the boilers, then unplug the machine and allow it to cool.2) Remove the panels from the machine. You will also want...