Items Needed: Cup or a sink Remove the water tank and drip tray Grab a cup or place the machine facing a sink. Tip the machine forward and open the steam arm and you will see water start to flow. Hold the machine and allow as much water as...
Tools Needed:2.5mm Allen Wrench3mm Allen Wrench1. Unplug the machine, remove the water tank. Allow machine to cool off.2. Remove the top cup tray panels from the machine. Underneath you will find the lower cup tray. Remove the 6 screws shown here...
Tools needed: 2.5mm Allen key or hex driver -Make sure that the machine is unplugged and cool to the touch before beginning.-1. Remove the cup tray and water reservoir cover.2. Remove the four 2.5mm hex screws on the top panel. (There will be two...