ECM Casa V: Panel RemovalUpdated 6 months ago

Tools needed:

• 2.5mm Allen key or hex driver

-Make sure that the machine is unplugged and cool to the touch before beginning.-

1. Remove the cup tray and water reservoir cover.

2. Remove the four 2.5mm hex screws on the top panel. (There will be two remaining screws holding the top panel in place at this point.)

3. Remove the two screws on the back of the top panel (reservoir must be removed to access). The top panel will now be able to be lifted off completely.

4. Remove the six hex screws holding the back panel in place, then lift the panel directly up and out of the "tracks".

5. Unscrew the retaining nut on the reservoir inlet adapter, then pull the inlet adapter free and push it aside.

NOTE: Don't lose the inlet adapter retaining nut.


6. Tilt the machine back and unscrew the two screws on the bottom of the machine; these screws hold the reservoir tray in place.


7. Lift the reservoir tray straight up and out of the machine.


8. You will now have complete access to the inside of the machine.