Tools needed: Philips Screwdriver Adjustable Wrench Unplug your Lucca Solo from the wall outlet. Remove the panels from your LUCCA Solo. Locate the safety switch on top of the boiler. Using your screwdriver or your finger, press down on the red...
Tools needed: Phillips Screwdriver Adjustable Wrench 10mm Wrench 12mm Wrench PTFE Tape Wire cutters Remove the panels of your LUCCA Solo. Disconnect the water inlet from the pump. Disconnect the wires from the pump. Use the 10mm wrench to...
Tools needed: Phillips Screwdriver Adjustable Wrench Remove the panels from your Lucca Solo. Locate the SSR at the back of the machine. Notice that each terminal on the SSR is labeled (L1, T1, A1(+), and A2(-)). For the new SSR to function the...
Tools needed: Syringe/Baster/Squirt Bottle (something to force water through the intake tube) Remove the cup warming tray. Locate the intake tube (there should be a filter on the end on the tube). Turn the machine on, and with the water delivery...
Tools needed: Phillips Screwdriver Adjustable Wrench 7/32" Wrench Wire Cutters Zip Tie Remove the panels of your Lucca Solo. Disconnect the Water Sensor wiring harness. Use the 7/32” wrench to remove the 2 water sensor mounting nuts. Use the wire...