LUCCA Solo: Replacing the Water SensorUpdated 5 months ago

Tools needed:

• Phillips Screwdriver 
• Adjustable Wrench 
• 7/32" Wrench 
• Wire Cutters
• Zip Tie 
  
  

1. Remove the panels of your Lucca Solo.

2. Disconnect the Water Sensor wiring harness.

   
   
   
   
   
3. Use the 7/32” wrench to remove the 2 water sensor mounting nuts. 
   
   
   
   

4. Use the wire cutters to remove the zip tie securing the wires and remove the old water sensor. 

    

   

   
   
   
5. You've successfully removed the water sensor from the LUCCA Solo! To install the new water sensor, simply follow these instructions in reverse order.