Tools Needed: 2.5mm Allen Wrench 3mm Allen Wrench Phillips Screwdriver Before doing this procedure: Unplug your grinder and remove all the beans from the throat of the hopper. To check the inside of the control panel: 1. Remove the top plate from...
Tools needed: 2.5mm Allen Wrench 3mm Allen Wrench 1. Remove the hopper from the machine and clear out any beans from the throat of the grinder.2. Remove the top plate of the grinder with the 3 screws circled here. 3. Remove the control panel of...
Join Victoria as she demonstrates how to set up and dial-in the Eureka Atom Espresso Grinder. Please note that Clive Coffee also offers a grinder dial-in service if you prefer to have someone else do the hard work for you! Step 1: Out of the box...
Before doing this we recommend unplugging the grinder. Tools required: 2.5mm allen wrench 3mm allen wrench phillips screwdriver NOTE: These instructions show a pre-2020 Eureka Atom model. Post-2020 models use a different chute design, but are...
You will need to unplug the grinder and remove all beans before doing this. Tools Needed: 2.5mm Allen Wrench 3mm Allen Wrench 1. Remove the top plate of the machine by taking out the 3 screws in top. 2. Remove the control panel of the machine with...
Please read carefully before using your Eureka Atom.If you have any other questions, be sure to contact us.Setup Video Grind AdjustmentThe grind setting of the Eureka Zenith 65E is adjusted by turning the small grind adjustment dial on the top of...
Before doing this troubleshooting verify the grinder motor still functions even though the screen is off by pressing the dosing button. Once power to the motor has been verified unplug the grinder, remove beans from the chute and burr assembly and...
Before doing this we recommend unplugging the grinder. Tools required: small flathead screw driver compressed air At this point you can plug the machine back in and turn the switch back on to verify the screen and light on the switch are responsive.
Over time a small amount of grind particles can escape the chute and fall into the grind switch, causing it to intermittently work. If that happens you can remove the front panel and clean it with compressed air. Tools required: 2.5mm allen wrench...
Before doing this we recommend removing all beans from the burr chamber and unplugging the machine. Tools required: 2.5mm wrench allen wrench adjustable wrench flat head or phillips screw driver
Now that the burr chamber is empty: At this point, the grinder is ready to begin pulling shots and doing the fine adjustments necessary to get your perfect ratio.
Before doing this be sure to unplug machine. Tools required: Phillips screwdriver 1. Remove the screws holding the bottom panel in place. 2. Make sure the capacitor connections are clean and securely installed. 3. Verify that the main power...
Join Charles as he demonstrates how to set up and dial-in the Eureka Atom 65 Espresso Grinder. Step one: Out of the box and onto the counter Remove the grinder from its box and place it on a solid level surface. Inspect the grinder for any damage....
Please read carefully before using your Eureka Atom 65 or Atom 75 espresso grinder. If you have any other questions, be sure to contact us. Lucca Atom 75 Setup Video Lucca Atom 65 Setup Video Grind Adjustment The grind setting of the Eureka Atom...
Follow along as we demonstrate how to set up and dial-in the Eureka Atom 75 Espresso Grinder. Step one: Out of the box and onto the counter Remove the grinder from its box and place it on a solid level surface. Inspect the grinder for any damage....