Eureka Atom: Screen IssuesUpdated 6 months ago

Before doing this troubleshooting verify the grinder motor still functions even though the screen is off by pressing the dosing button. Once power to the motor has been verified unplug the grinder, remove beans from the chute and burr assembly and follow the steps below. Tools required:

• 2.5mm hex wrench
• 3mm hex wrench
• phillips screwdriver

At this point the front panel can be reattached to the machine before opening the bottom panel.

If all wires have been verified and are connected and the motor does work then the screen will need to replaced. Please contact us at [email protected] for information on how to move forward.