Tools needed:- 17mm crescent wrench or deep socket- Needle-nose pliers- Phillips head screwdriver- Flat head screwdriver Parts needed:Vacuum Breaker Rebuild Kit 1. Remove the top panel. 2. Locate the vacuum breaker and remove the flexible tube.3....
NOTE: This article shows the hot water valve, the same steps apply to the steam valve.Tools Needed:- 21mm crescent wrench or adjustable wrench- Pick or small prying implement- PTFE tape aka plumber's tape OR food safe thread sealant- New plumbing...
Tools needed: - #2 Phillips screwdriver- Small flathead screwdriver- Multimeter or simple continuity tester1. Remove the top panel. 2. Identify the two safety switches on top of the steam boiler. 2. Carefully use a finger or small flathead...
Tools Needed:- 17mm crescent wrench or adjustable wrench- Pipe cleaning brushes- Compressed air- Shop towelsNOTE: Begin with the machine unplugged and cool to the touch.1. Remove the panels from the machine.2. Remove the hot water valve...
Tools Needed:- 12mm, 13mm, 17mm crescent wrenches- Adjustable wrench (optional)1. Remove the panels from the machine.2. Identify the steam boiler fill solenoid.3. Disconnect the electrical leads from the solenoid box. Take note of their...
Tools needed:- 12mm and 19mm crescent wrench- PTFE tape- Coffee equipment cleaner (Urnex)- Emory cloth or scouring padNOTE: The machine must be unplugged and cool to the touch before beginning.If your fill probe has developed a leak at the base...
Tools Needed:- Pick or small flat-bladed screwdriver or similar implement1. Remove the chrome center button from the rotary knob. The center button is held in place by friction and a simple o-ring, so you should be able to remove it by hand with a...
Tools Needed: Phillips Screwdriver 15mm Combination Wrench Teflon Plumbers Tape Flathead Screwdriver (optional) Parts Needed: Replacement Lelit Bianca Safety Valve 1. Remove the top panel of your Lelit Bianca.2. Locate the safety valve on top of...
This procedure should only be performed with the machine unplugged and once it has completely cooled and depressurized. Tools Needed: Phillips screwdriver Impact Driver 38mm Impact Socket and Extension Shop towel Something to elevate the grouphead...