This is useful if the machine's steam boiler element has failed. Before attempting this we recommend unplugging the machine and allowing it to fully cool down. Tools required: Phillips screwdriver 2x adjustable wrenches 10mm socket Before...
Temperature probes can often cause issues with steam boilers over-heating or not heating at all. Both of these outcomes will cause a blocking alarm to appear on the control panel of the machine that communicates when the steam boiler has been...
Tools Needed:- Multimeter- Clip-style multimeter leads- 15mm wrench- Wire snips or scissors1. Identify the steam boiler temperature sensor.2. Snip the zip tie holding the temperature sensor leads together. Pull back the insulators and separate the...