LUCCA A53 / Mini / Vivaldi: Testing the Steam Boiler Temperature SensorUpdated 6 months ago

Tools Needed:

- Multimeter

- Clip-style multimeter leads

- 15mm wrench

- Wire snips or scissors

1. Identify the steam boiler temperature sensor.

2. Snip the zip tie holding the temperature sensor leads together. Pull back the insulators and separate the electrical connections.

3. Use the 15mm wrench to unscrew the sensor from the machine.

4. Set your multimeter to the resistance setting (Ω) and set the range to the 20M setting. Touch the multimeter probes to the temperature sensor leads or attach the multimeter clips.

The temperature sensor acts as a variable resistor, with the resistance value changing inversely in response to changes in ambient temperature. The resistance value decreases as the temperature of the probe increases and vice versa. At roughly room temperature the probe should display a resistance of between 200kΩ and 300kΩ (or 0.20MΩ to 0.30MΩ).

5. Warm the sensor up in your hand, while keeping an eye on the multimeter display. You should see the resistance value start to drop almost immediately as the sensor warms up. Look for a steady decrease. Let go of the multimeter and watch as the resistance value climbs back up as the sensor cools down.

If your multimeter displays 0 resistance or infinite resistance (O.L.), the temperature sensor is most likely faulty. If the temperature sensor does not consistently respond to changes in temperature that is also an indication that it's likely faulty.