Tools Needed: 2.5mm Allen Key 17mm Wrench 1. Remove the top panel of your machine. 2. Remove the 2 wires from the temperature sensor. 3. Use a 17mm wrench to remove the sensor, once it's loose you will be able to remove it with your fingers. 4....
Before doing this we recommend letting the machine fully cool off and unplugging it. Also, you will need to remove the top panel. Tools required: 2.5mm allen wrench multimeter(not necessary but helpful) When checking the switches it is also...
Tools Needed: 2.5mm allen key 17mm Wrench 21mm Wrench 1. Remove the top panel of the machine by taking out the 4 2.5mm allen screws in the top panel and then lifting it off. 2. The pipe is located in the front left of the machine. 3. You'll be...
Tools Needed: 2.5mm Allen Key Flathead Screwdriver 1. Remove the top panel of the machine by removing the 4 screws in the top panel and then lifting it off the machine. 2. The pressure stat is on the right side of the machine. Make small...
Before doing this you will need to remove the top panel from your machine. Unplug the machine and allow it to fully cool off. Tools required: adjustable wrench x2 A new vacuum breaker/safety valve, available here.With the top panel removed, you...
Tools Needed:- 2.5mm Allen key or hex driver- Small flathead screwdriver- Multimeter or simple continuity testerNOTE: The machine should be unplugged and cool to the touch before testing the high-limit switches.1. Remove the reservoir cover and...
What you'll need: 2.5mm allen key 3mm allen key 13mm wrench Pliers Scotch-Brite pad Cafiza/espresso cleaning solution PTFE tape NOTE: Drain the machine's boilers before attempting this procedure; then unplug the machine and allow it to cool...