Tools Needed: 2.5mm + 3mm Allen Wrenches 20mm Crescent Wrench OR Adjustable Wrench 1. Remove the panels of the machine: Pro 700 Panel Removal 2. Remove the old safety valve. 3. Teflon tape the new safety valve threads. 4. Install the new safety...
Tools needed: 9mm wrench pliers
Tools Needed: Adjustable wrench 21mm open ended wrench or a second adjustable wrench PickLink to the part if needed for replacement: Steam/Hot Water Arm Plumbing Gasket 1. Allow the machine to fully cool down. 2. Unscrew the valve assembly from...
Before doing this we recommend allowing the machine to fully cool off and unplugging the machine. Tools required: 3mm Allen key or hex driver 17mm wrench or adjustable wrench Highly recommended: 17mm deep socket and socket wrench with extension A...
What you'll need: - 13mm wrench - Steel wool or brush First, you'll need to remove the panels of your machine. Locate the fill probe, and disconnect the wiring from the top. Using a 13mm wrench, loosen the top nut portion of the probe connection....
What you'll need: - 14mm wrench - 17mm wrench First, you'll need to remove your panels. Locate your Temperature Probe, directly in the middle of your steam boiler. You'll want to remove the Safety Switches, as also notated here, disconnecting the...