Profitec Pro 700: Cleaning and Replacing Steam / Hot Water Arm GasketUpdated 6 months ago

Tools Needed:

• Adjustable wrench 
• 21mm open ended wrench or a second adjustable wrench
• Pick
  Link to the part if needed for replacement: Steam/Hot Water Arm Plumbing Gasket

1. Allow the machine to fully cool down.

2. Unscrew the valve assembly from the front of the steam or hot water arm using the 21mm wrench or an adjustable wrench. You may want to drape a towel over the valve to protect it from being scratched.

NOTE: Use a one wrench to hold the valve arm steady as you unscrew the valve assembly with the other wrench.

3. Clean or replace the gasket inside the steam or hot water arm.