Before doing this we recommend allowing the machine to fully cool off and unplugging the machine. Tools needed:- 3mm Allen key or hex driver bit- 17mm crescent wrench or deep socket- Needle-nose pliersParts needed:Vacuum Breaker Rebuild Kit 1....
You will need to allow the machine to cool off completely before attempting this procedure. Tools Needed: Molykote 111 lubricant or food safe lubricant of your choice Adjustable wrench Towel 1. Remove the outside portion of the steam or hot water...
To perform this repair you will need to have your machine unplugged and completely cool. Tools needed: 2.5 mm, 3mm, and 6mm allen keys 17mm wrench New Joystick Seal Gasket 1. Start by removing the top and side panels. 2. Next, using the 2.5mm and...
Tools Needed: 2.5mm + 3mm Allen Wrenches 20mm Crescent Wrench OR Adjustable Wrench Replacement Safety Valve 1. Remove the panels of the machine. 2. Remove the old safety valve. 3. Teflon tape the new safety valve threads. 4. Install the new safety...
Tools Needed: 3mm Allen Wrench 14mm Crescent Wrench OR Adjustable Wrench 1. Remove the panels of the machine. 2. Unplug and allow your machine to fully cool down. 3. Locate the fill probe. 4. Remove the electrical connector 5. Using your wrench,...