ECM Synchronika: Cleaning the Fill ProbeUpdated 5 months ago

Tools Needed:

• 3mm Allen Wrench
• 14mm Crescent Wrench OR Adjustable Wrench
  
  

1. Remove the panels of the machine.

2. Unplug and allow your machine to fully cool down.

3. Locate the fill probe.

4. Remove the electrical connector

5. Using your wrench, loosen the top nut until it can easily be moved by hand.

6. Lift the probe 'paddle' upward until the probe slides out of the teflon sheath.

7. Using steel wool, or a clean kitchen sponge, clean the probe of any scale or debris.

8. Replace the newly cleaned probe and reassemble the machine for testing.