You will need to unplug your machine and allow it to fully cool before doing this procedure. Tools Needed: Phillips Screwdriver 1. Remove the side panels of your machine, you can check out the article on how to do that here: A53 Mini Panel...
Below you will find instructions for installing wood panels on the LUCCA A53 Mini. Tools Needed: #3 Phillips head screwdriver 1. Remove the plastic side panels from your machine, you can see how this is done by following our guide on panel removal...
With the panels removed the machine can be turned on and operate as normal. Removing the panels helps with diagnosing water leaks and electrical issues. Tools needed: Phillips screwdriver At this point you can remove the side panels. On newer...