We recommend removing your drip tray, top tray and water tank before draining your boilers as well as allowing your machine to fully cool off. Tools needed: 7mm wrench or adjustable wrench drain bucket or sink towel 1. 2. 3. 4. *Don't forget to...
Tools Needed: 3.5 mm Allen Wrench 3 mm Allen Wrench Phillips Screwdriver 1. Turn the machine off, then remove the top cup warming tray and water tank.2. Loosen the screws on the bottom of the machine as shown in this photo. 3. On each side in the...
Before doing this we recommend unplugging your machine from its power source and allowing it to cool off from operating temperature. Tools needed: Phillips screwdriver 1. 2. 3. 4. 5. 6. If you need to access the heating elements, the boiler drain...