Important Setup Notes: The Bezzera Duo requires setup upon delivery that includes reconnecting a fitting inside the unit, outlined in the process here.If you will be plumbing the machine in to a water line, it's important to make sure that the...
Please read carefully before operating your dual boiler, rotary pump espresso machine. For a list of specifications, included accessories, and other details on the Bezzera Duo DE, check out our website. For setup information, please see the setup...
Tools Needed - 3mm allen key 1) Remove the cup warming tray from the top of the machine 2) Use the 3mm Allen key to remove the four screws in the top panel, then set the top panel aside.3) Tip the machine gently onto its back, remove the red...
Tool Needed: - 3mm Allen Key - 13mm Crescent Wrench 1) First you'll need to remove the cup warming tray 2) Using your 3mm Allen Key, remove the top panel of the machine. (loosen the two screws in the front and remove the two behind the reservoir...
Before attempting this we recommend allowing the machine to fully cool off, unplugging it, and removing its water source. Tools needed: 3mm Allen wrench 13mm or adjustable wrench 16mm or adjustable wrench Needlenose pliers Flathead screwdriver...
Tools needed:- 3mm Allen key or Hex driver- Damp cloth1. Remove the top panel from the machine.2. Look into the top of the machine and make sure the water sensor electrical leads are securely plugged-in.3. Remove the reservoir from the machine and...