Bezzera Duo DE: Panel RemovalUpdated 6 months ago

Tools Needed

- 3mm allen key

1) Remove the cup warming tray from the top of the machine

2) Use the 3mm Allen key to remove the four screws in the top panel, then set the top panel aside.


3) Tip the machine gently onto its back, remove the red screws marked in the picture, and loosen the green screws to allow to panels to slide out.

4) Bring the machine back upright, loosen the two screws marked in green at the top of the front panel (on either side)

5) With the last screws loosened, the panels should slide downwards and then back, away from the machine.

6) Before removing the panels completely, you'll need to disconnect the rear LED panel by unplugging the small black connector.