Profitec Pro 400: Rotary Knob RemovalUpdated 6 months ago

Tools Needed:

- Small adjustable wrench

- Towel

1. Make sure the knob is fully closed.

2. Use the small adjustable wrench to loosen and remove the retaining nut in the center of the knob. You may want to drape a small towel over the knob, to avoid marring the nut or the knob.

3. Pull the knob straight off of the center spindle. The insert will come with it.

4. Place the insert of your choice in the knob and follow these steps in reverse to re-install the knob. Make sure to orient the insert in the position of your choice before tightening the retaining nut.