1. Start with the machine plugged in, but powered off. 2. Press and hold both PID buttons at the same time.3. Flip the power switch to the ON position, while continuing to press and hold the PID buttons. The PID will display a few sequential...
Tools Needed:- 13mm crescent wrench- Multi-grip pliers (aka Channellocks)- Large measuring cup OR pitcher and tared scale. - Recommended: 8mm ID or 1/4"-3/8" ID silicone tubing 1. Start by removing the top panel from the machine.2. Identify the...
Tools Needed: Phillips Screwdriver Note: The machine should be unplugged and cooled to the touch before beginning. Remove the top panel from your Silvia Pro or Pro X. Locate the safety switches on top of the coffee boiler. 3. Firmly press down on...
Tools Needed: Phillips screwdriver Note: Your machine should be unplugged and cooled to the touch before beginning. 1. Remove the top panel of your Silvia Pro or Pro X. 2. Locate the steam boiler safety switch. It can be found in the middle of the...
Tools Needed: Phillips Screwdriver If a replacement fuse is needed you will need a T8A250V fuse. 1. Remove the top panel of your Silvia Pro or Pro X. 2. Locate and unthread the inline fuse housing (it is just behind the power switch). 3. Remove...
Tools needed: - Syringe or baster, something to force water into the inlet tube 1. Remove the reservoir lid and locate the split inlet tube: 2. Turn the machine on, and with the water delivery tool of your choice, force water into the inlet tube:...
Tools needed: - Philips head screw driver - 17mm deep socket + socket wrench *Make sure the machine is completely cooled.* 1. Remove the top panel and locate the hot water solenoid: 2. Use the Philips-head screw driver to unscrew the power cable...
Tools Needed:- Fingies- Philips head screwdriver- 12mm crescent wrench- 13mm crescent wrench- Pitcher - Towel (for spills)- Replacement pump (if needed)1. Please start by draining your machine as best you can and then allow plenty of time for the...
You'll need: - Phillips head screw driver- Small precision screw driver - Small Flat Blade (optional to help disconnect the wires from the CPU) - New CPU (if applicable) Before performing this repair, you should first contact allow the machine to...