Tools Needed: Phillips screwdriver Flathead screwdriver 1. Turn the machine off and allow it to cool down. 2. You'll need to remove the panels of the machine to access the OPV, follow along with our article here on how to remove the panels of the...
Tools Needed: Phillips screwdriver Unplug the unit from the power source to ensure safety when touching internal components. Remove the top panel by taking out the two screws on the top of the machine behind the reservoir as pictured below. Press...
What you'll need: - Syringe or baster, something to force water into the inlet tube *removing the top panel of the machine is optional* To prime the pump, you'll need to access the pump inlet tube. This is usually indicated by the large particle...
Tools Needed:- #2 Phillips screwdriver- Slim flat-bladed screwdriver (or similar)NOTE: The machine must be unplugged and cool to the touch before beginning. 1. Remove the top panel from the machine. 2. Identify the back of the power switch inside...