Tools Needed: Phillips screwdriver (long-reach if available) Pitcher or similar vessel to catch water Note: Depending on when the machine was manufactured a 7mm deep socket, ratchet extension, and ratchet may be needed. Be sure your machine is...
Tools Needed: Phillips head screwdriver 17mm crescent wrench Scouring pad or wire brush Urnex or espresso cleaning solution PTFE tape Towel (to catch spills) Replacement Temperature Probe (if necessary) Begin with your machine unplugged and fully...
For your convenience, here is our step by step instructions to drain the boilers on your Rancilio Pro/Pro X. These steps are also outlined in the manual. Note: If you are unable to turn the machine on, please see these articles for how to drain...
Tools Needed:- 12mm crescent wrench- Wire bristle brush or scouring pad1. Remove the panels from the machine.2. Identify the fill probe on the top of the steam boiler.3. Remove the electrical connections on the heating element legs to give...