Tools needed:-Phillips head screwdriver-T20 Torx -Adjustable wrench-19mm deep socket1. Remove the panels.2. Remove nut holding electrical box in place with an adjustable wrench. 3. Remove Solenoid shaft, exposing the body of the valve - inspect...
Tools needed: - T20 Torx driver- Small flathead screwdriver- Multimeter or simple continuity tester NOTE: The machine should be unplugged and cool to the touch before beginning.1. Remove the top panel. 2. Identify the two safety switches on top of...
Tools Needed:- 19mm deep socket with extension-Scouring pad or wire bristle brush- PTFE tape 1. Remove the top panel from the machine.2. Identify the machine's fill probe.3. Remove the electrical connector from the fill probe.4. Use the deep...
Tools Needed: Phillips Screwdriver Adjustable Wrench Small Phillips Screwdriver 13mm & 14mm crescent wrench 17mm deep socket wrench (and attachment if necessary) Replacement solenoid 1. Remove the panels from the machine (you may leave the...