1. First, you will need to drain the boilers. 2. Reinstall the butterfly-shaped screws in the bottom of the machine, securing the pump to the frame. 3. Put the bag over the top of the machine, the cord will get coiled up and put where the drip...
1. Replace the butterfly shaped screws in the bottom of the machine to secure the pump to the frame. 2. Drain the boilers. 3. Remove the drip tray and place the bag over the machine. Wrap the cord up on itself and place it outside the bag where...
If you are repackaging the machine without the original packaging, please follow our instructions here for Repackaging with Instapack. It is extremely important to repackage machines correctly. If machines are repackaged incorrectly and damaged...
It is extremely important to repackage machines correctly. If machines are repackaged incorrectly and damaged upon arrival at Clive for repair or return Clive will not cover the cost of the damages. You will first need to drain your machine, which...
NOTE: The boilers must be fully drained before shipping the machine.1. Drain the boilers of your machine. 2. Remove drip tray, place bag over the top of the machine and wrap the cord into itself and place it in the space where the drip tray was....
NOTE: The machine must be drained before repackaging. 1. Drain the machine. 2. Place 2 squares of foam shingles on top of one another in the center of the box in order to high-center the machine when it's placed in the box. 2. Place the foam...
Make sure to drain the boilers before repackaging the machine. 1. Place the braided line and the drain line in the plastic bag, place the drip tray grate back into its foam sleeve. 2. Place the foam sleeves on the steam arm and hot water arm (1 +...
1. Place the plastic bag over the machine with the top tray in place. The drip tray should be removed and put into the accessory box that will go on top. Set the machine inside box on top of the bottom padding, and then place the protective foam...
1. Drain the boiler. Video and step-by-step instructions can be found on our ECM Classika Boiler Draining article. 2. Place the bag over the top of the machine, place it into the box with the 4 feet matching up with the holes in the foam at the...
Before putting the machine away, follow our draining instructions which can be found here: Profitec Pro 700 Boiler Draining Instructions. (This process is the same for both the Pro 600 and Pro 700 espresso machines). 1. Place the bag over the...
The machine must be drained before repackaging. 1. Place the accessories box under the group head and place the bag over the machine. Wrap the cord upon itself and place it inside the bag. 2. Place the expanded foam piece in the front of the...
Before putting the machine away, follow our draining instructions which can be found here: Profitec Pro 500 Boiler Draining Instructions. 1. Place the bag over the machine, wrap the cord up and place it where the drip tray was on the outside of...
1. Ensure the machine is drained - this can be accomplished by heating the machine up fully, turning the machine off and then running the hot water tap until there's no water left coming out. 2. Remove the front feet of the machine and put them...
Begin by covering your machine with the bag and placing the machine in the center of the folding cardboard insert. Next, place the portafilter and power cord into the small cardboard box and place this under the grouphead. Fold the cardboard...
The machine's boilers must be drained before repackaging.1. Please make sure your machine is cool to the touch and drained before you place the foam covers over the steam and hot water arm and then cover the machine with the plastic bag. Please...
The machine's boilers must be drained before repackaging.1. Place the plastic bag over the machine, put the machine in the box and add the 3 pieces of expansion foam on the rear corners and under the group head. Place the power cord, detached from...
Before repackaging: Drain the boilers - while we work on a video specific to the Elizabeth, the Pro 300 article linked reflects the same draining process.1. The power cord and small drip tray riser will go in their small plastic bags and be placed...
1. Place the bag over the grinder, secure the cord underneath the chute. 2. Place the lower foam in the bottom of the box. 3. Place the grinder on its side, paying special attention to put the grinder in the correct direction so that it fits into...
The boilers must be drained before repackaging the machine. 1) Coil the power cord under the group head and bring the steam and hot water wands towards the center of the machine. 2) Place the cup warming tray on top of the machine and cover the...
NOTE: The machine will need to be drained before shipping.1) Coil the power cord and maneuver the steam wand to touch the front panel of the machine.2) Assemble your accessory box including the downspout from the drip tray.3) Position the...
1. Unplug the machine, drain right away. You can follow along with our Synchronika Drain Instructions as they will go along the same process for the Duetto. 2. Remove all 4 feet from the Duetto and then set it into the box with the foam padding...
Below you will find instructions for repackaging the Eureka Zenith. 1. Pack the hopper in with padding on all sides. 2. Place the grinder in facing the end of the box with the bag over the top of it, and place padding on top of the hopper. 3....
1. Clean out the grinder, remove all excess beans and run any remaining coffee through the grinder. Use a small brush to clean out any leftover coffee. 2. Wrap the cord so that the prongs will not scratch the machine. 3. Check the foam in the...
1. Clean out all beans from the hopper and grinder itself. Run the burrs with no coffee inside to clear any remaining coffee from the burrs. Unplug the machine and brush out/blow compressed air into the burrs to fully clean out the grinder (be...