Tools Needed:- 3mm Allen wrench or hex driver - Shop towel - Optional: Something to elevate the grouphead (i.e. a piece of a 2x4) NOTE: The machine should be unplugged and cool to the touch before you begin.1. Start by removing the drip tray, cup...

Tools Needed: - 3mm Allen wrench or hex driver- Shop towel- Optional:&#xA0;Something to elevate the grouphead (i.e. a piece of a 2x4) NOTE: The machine should be unplugged and cool to the touch before you begin. 1. Start by removing the drip tray, cup tray, and reservoir.<img alt="Pro400_panel_removal_1" class="hs-image-align-none fr-fic fr-dii" height="516" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro400_panel_removal_1.jpg" style="height: auto; width: 688px;" width="688">2. Using a 3mm Allen key, remove the 4 Allen screws as indicated.&#xA0; Remove the top panel and set it aside.<img alt="Pro400_panel_removal_2" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro400_panel_removal_2.jpg" style="height: auto; width: 688px;" width="688">&#x2014;Stop here if all you need to do is access the top of the boiler.&#x2014;&#xA0;3. Loosen (do not remove) the 4 Allen screws indicated that attach the side and rear panels<img class="hs-image-align-none fr-fic fr-dii" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_3-jpg.jpeg" style="height: auto;"><img alt="Pro600_panel_removal_4" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_4.jpg" style="height: auto; width: 688px;" width="688">&#xA0;4.Place a towel on the counter or object used to raise the grouphead.&#xA0; Tilt the machine forward so the machine is resting on the grouphead.<img alt="Pro600_panel_removal_5" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_5.jpg" style="height: auto; width: 688px;" width="688"><img alt="Pro600_panel_removal_6" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_6.jpg" style="height: auto; width: 688px;" width="688">5. Loosen the 6 Allen screws indicated that attach the panels to each other and to the frame.<img alt="Pro600_panel_removal_7" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_7.jpg" style="height: auto; width: 688px;" width="688">6. Lift the rear panel up and away from the side panels.<img alt="Pro600_panel_removal_8" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_8.jpg" style="height: auto; width: 688px;" width="688">7. Remove both side panels by sliding them towards the bottom of the machine and moving the bottom of the panel away from the frame.&#xA0; Then lift the panel out of the notch at the top of the frame.<img alt="Pro600_panel_removal_9" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_9.jpg" style="height: auto; width: 688px;" width="688">&#x2014;Your panels have been removed and you may tip your machine upright if needed for testing.&#x2014;8. Follow the instructions in reverse to re-install the panels.NOTE: The Allen screws with washers on the side panels are to be positioned to insert into the notch on the front of the frame with the washer located on the inside of the frame.<img alt="Pro600_panel_removal_10" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_panel_removal_10.jpg" style="height: auto; width: 688px;" width="688"> To access the underside of the boilers and the heating elements as shown in Step 5, simply remove the access panel: <img alt="Pro600_heatingelement_access_01" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_heatingelement_access_01.jpg" style="height: auto; width: 688px;" width="688"> <img alt="Pro600_heatingelement_access_02" class="hs-image-align-none fr-fic fr-dii" height="688" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_heatingelement_access_02.jpg" style="height: auto; width: 688px;" width="688">&#xA0;

Profitec Pro 600: Removing the Panels

Tools Needed: 2 Cup Measuring Cup Large Pitcher Towels 1. Allow your Pro 600 to heat fully. Then turn off and unplug your machine. Remove the cup warming tray, water reservoir, and drip tray. 2. Standing in front of your Pro 600, use a towel to...

Tools Needed:<ul><li>2 Cup Measuring Cup</li><li>Large Pitcher</li><li>Towels</li></ul>1. Allow your Pro 600 to heat fully.&#xA0; Then turn off and unplug your machine.&#xA0; Remove the cup warming tray, water reservoir, and drip tray.<img alt="Pro600_boiler_drain_1" class="hs-image-align-none fr-fic fr-dii" height="516" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_boiler_drain_1.jpeg" style="height: auto; width: 688px;" width="688"> 2. Standing in front of your Pro 600, use a towel to grab the top of the machine where the water reservoir sits and tip the machine towards you.&#xA0; Holding it with one hand so the machine is balancing on the frame/legs.<img alt="Pro600_boiler_drain_2" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_boiler_drain_2.jpeg" style="height: auto; width: 688px;" width="688"> 3. Place the measuring cup below the grouphead and lift the brew lever&#xA0; Allow the water to siphon out of the grouphead.&#xA0; Approximately 10-16 ounces of water should dispense from the grouphead.&#xA0; Lower the brew lever.<img alt="Pro600_boiler_drain_3" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_boiler_drain_3.jpeg" style="height: auto; width: 688px;" width="688">4.&#xA0; Set your Pro 600 back down and the pitcher below the hot water tap.&#xA0; Open the hot water valve and allow the hot water to dispense until the flow stops.&#xA0; Once the water stops flowing you may close the valve.<img alt="Pro600_boiler_drain_4" class="hs-image-align-none fr-fic fr-dii" height="917" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/Pro600_boiler_drain_4.jpeg" style="height: auto; width: 688px;" width="688">5. Ensure that the power switch is in the off position.&#xA0; Make sure the valves are closed and allow the machine to cool.&#xA0;

Profitec Pro 600: Boiler Draining

Clive Coffee

Panel Removal & Draining The Boilers

Profitec

Profitec Pro 600

Plumbing an Espresso Machine for Flojet Installation

Water Filter and Softener System Installation

The Importance of Water Composition in Espresso

Formatting Examples

How Water Affects Your Espresso Machine

Upgrading your Water Softener Cartridge from 2 Cartridges to 1

How Water Can Make or Break Your Coffee

Water

Using Grindz to Clean Your Grinder

Dialing In Your Grinder

Jammed Burrs in your Espresso Grinder

How to Clean Your Grinder

Espresso Tech 101: Testing a Motor Capacitor

Grinder Cleaning & Maintenance

Espresso Tech 101: Basic Bench Testing

Removing and Cleaning Group Head Screens

How to Clean and Backflush E61 Group Head Machines

Understanding Your Brew Pressure Gauge

Using Rinza to Clean Your Steam Wand

Steam / Hot Water Leak: Diagnosis & Repair

PID Settings and Clive Recommended Settings

How to Clean and Backflush (non-E61 Group Head) Espresso Machines

E61 Cam Lubrication for Sticky/Squeaky Brew Lever

Water: Descaling Your Espresso Machine

E61 Gicleur Inspection and Cleaning

Cup Ratings; What do they mean?

Espresso Tech 101: Vibratory Pump Re-Priming

Espresso Machine Cleaning & Maintenance

Espresso Brew Ratios From La Marzocco

What is Channeling?

How to Pull the Perfect Shot of Espresso

Single baskets: What's the deal?

How to Tamp (Correctly)

Brew Ratios, Basket Sizes, and the Confusion over a "Double Shot"

Clive's Flow Control Recipe

Coffee & Pulling Shots

Steam Wand Tips and Milk Steaming Speed

How to Make Latte Art

How to Steam Milk

Steaming Milk

Espresso 101

La Marzocco: Receiving Your Espresso Machine

Unboxing Your Machine

Machine Serial Number Locations

Unboxing

Getting Started

Repackaging the ECM Synchronika

Repackaging the Profitec Pro 700

Repackaging the LUCCA A53/A53 Mini (Vivaldi II/Mini Vivaldi II)

Repackaging the LUCCA A53/A53 Mini (Vivaldi II/Mini Vivaldi II) with Instapack

Repackaging the Profitec Pro 300

Repackaging the ECM Casa V

Repackaging the LUCCA M58

Repackaging a QM67 in Pro 500 Box

Repackaging the ECM Classika

Repackaging the Profitec Pro 600

Repackaging the Rancilio Silvia Pro or Pro X

Repackaging the Profitec Pro 500

Repackaging the Profitec Pro 800

Repackaging the ECM Puristika

Repacking the Lelit Mara X

Repackaging the Lelit Bianca

Repackaging the Lelit Elizabeth

Repackaging the Eureka Atom 65 / 75

Repackaging the Bezzera Duo DE/MN

Repackaging the Bezzera BZ10

Repackaging the Alex Duetto

Repackaging the Eureka Zenith

Repackaging the Macap M7D

Repackaging the Profitec T64

Repackaging Instructions

Clive Coffee Warranty

Repairs

Getting Warranty Service

Clive Coffee 1-year Commercial Warranty

Espresso Machine: Need Technical Assistance?

Grinders: Need Technical Assistance?

Warranty and Repairs

Credit Card Charges for Espresso Machines

Free ground shipping over $75

Changes, Holds, or Pick-Up Requests to Orders

How do I modify an order once it's been placed?

Returns & Exchanges

How to track a freight shipment

Order Changes, Returns, Shipping & Payment

Warranty, Ordering & Returns

Open Box vs Certified Pre-Owned

Trade-In Program Details

Open Box, Certified Pre-Owned & Trade-In Program

LUCCA A53 Mini: Using Pre-Infusion

LUCCA A53 Mini / Mini Vivaldi II: Draining the Boiler

LUCCA A53 Mini: User Manual

LUCCA A53 Mini: Setup Guide Video

LUCCA A53 Mini / Mini Vivaldi: Adjusting The Expansion Valve

LUCCA A53 Mini / Mini Vivaldi: Vacuum Breaker

LUCCA A53 Mini / Mini Vivaldi: Cleaning the Fill Probe

LUCCA A53 Mini / Mini Vivaldi: Replacing Safety Valve

LUCCA A53 Mini / Mini Vivaldi: Steam Boiler Temperature Sensor Cleaning and Replacement

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Cleaning or Replacing Group Head Solenoid (pre-2019)

LUCCA A53 Mini / Mini Vivaldi: Cleaning Fill Solenoid

LUCCA A53 / A53 Mini / Vivaldi: Group Head Cleaning and Maintenance

LUCCA A53 Mini / Mini Vivaldi: Hot Water Solenoid Disassembly

LUCCA A53 Mini / Mini Vivaldi: Cleaning Flow Meter

LUCCA A53 Mini / Mini Vivaldi: Cleaning Fill Probe and Sealing Boiler Connection

LUCCA A53 Mini / Mini Vivaldi: Inspecting and Cleaning the Water Tank Check Valve

LUCCA A53 Mini / Mini Vivaldi: Inspecting Inlet Tubing

Lucca A53 Mini / Mini Vivaldi: Expansion Valve (OPV) Service and Replacement

Cleaning/Maintenance

LUCCA A53 Mini: Steam Boiler Over-pressurizing

LUCCA A53 Mini / Mini Vivaldi: Vibratory Pump Replacement

LUCCA A53 Mini: No Water From Group Head

LUCCA A53 Mini: Machine Not Turning On

LUCCA A53 Mini / Mini Vivaldi: OPV / Steam Gauge Fitting Leak

LUCCA A53 Mini: Priming the pump

LUCCA A53 Mini: Steam Boiler Not Heating

LUCCA A53 Mini / Mini Vivaldi: Replacing the Steam Lever

LUCCA A53 Mini: No Hot Water From Water Tap

LUCCA A53 Mini / Mini Vivaldi: Pump Pressure Gauge Vibration/Oscillation

LUCCA A53 / A53 Mini: Flowmeter Error / Volumetric Dosing problems

LUCCA A53 / A53 Mini: Machine Tripping the GFCI

LUCCA A53 Mini: Draining Steam Boiler With No Drain Nut

LUCCA A53 / A53 Mini: 15 & 20 Amp Power Modes

LUCCA A53 Mini / Mini Vivaldi: Replacing the Pressure Gauge

LUCCA A53/A53 Mini: SSR (Solid State Relay) Replacement

Lucca A53 Mini / Mini Vivaldi: Replace Magnet Float

Lucca A53 Mini: Force-flushing the Group Head

LUCCA A53 Mini / La Spaziale Mini Vivaldi: Fuse Housing Inspection and Replacement

General Troubleshooting

LUCCA A53 Mini: Programming Steam Boiler On/Off

LUCCA A53 / A53 Mini: Programming Volumetric Settings

LUCCA A53 / A53 Mini: Programming Steam Temperature Settings

Programming

LUCCA A53 / A53 Mini: Drying Inside of Temp Probe

LUCCA A53 Mini / Mini Vivaldi: Removing Steam Boiler Fill Valve

LUCCA A53 Mini: Steam Valve Assembly Replacement

Steam Boiler Maintenance/Troubleshooting

LUCCA A53 Mini / Mini Vivaldi: Replacing Coffee Boiler Temperature Probe

LUCCA A53 / Mini / Vivaldi: Testing the Coffee Boiler Temperature Sensor

Brew Boiler Maintenance and Troubleshooting

LUCCA A53 Mini / Mini Vivaldi: Removing the Front Panel

LUCCA A53 / A53 Mini: Installing Wood Panels

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Side & Front Panel Alignment

LUCCA A53 / Mini / Vivaldi: Panel Removal

Panel Removal and Installation

LUCCA A53 Mini: Installing Drip Tray Drain

LUCCA A53 Mini: Installing a Pre-Infusion Chamber

Install Upgrades

LUCCA A53 Mini/Mini Vivaldi

LUCCA A53: Draining the Boilers

LUCCA A53 Espresso Machine: Setup Guide

LUCCA A53: User Manual

LUCCA A53: Guide to Error Codes

LUCCA A53 / La Spaziale Vivaldi: Fuse Housing Inspection and Replacement

LUCCA A53 / Vivaldi: Misaligned Pressure Gauge

LUCCA A53 / La Spaziale Vivaldi: Rotary Pump Pressure Adjustment

LUCCA A53 / Vivaldi: Fuse Inspection

LUCCA A53 / Vivaldi: Expansion Valve Adjustment and Seat Replacement

LUCCA A53 / Vivaldi: Accessing Main Computer (CPU)

LUCCA A53 / Vivaldi: 15 & 20 Amp Power Modes

LUCCA A53 / Vivaldi: Replacing Rotary Pump

General Maintenance

LUCCA A53 / Vivaldi: Cleaning the Flow Meter Gicleur

LUCCA A53 / Mini / Vivaldi: Cleaning Hot Water Tap Tubing

LUCCA A53 / Vivaldi: Cleaning Fill Solenoid

LUCCA A53 / Vivaldi: Hot Water Solenoid Disassembly

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Cleaning or Replacing Group Head Solenoid (2019-Present)

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Inspecting and Cleaning Group Head Passages