Tools Needed: Pitcher (1 quart) Bowl or measuring cup (at least 1 pint capacity) 2. Heat machine fully. Remove top cup tray, water tank, drip tray, and unplug machine. 3. While standing in front of the machine tip it towards you, it should almost...
Tools required: 2.5mm allen wrench 3mm allen wrench mallet You may be able to bend the back panel into place by hand If you can't bend it back by hand remove the back panel.
Unplug the machine and let it cool down before following this procedure. Tools Needed: 2.5mm allen wrench 3mm allen wrench 1. Remove the water tank from the machine, and then take out the 4 screws in the top panel. It will lift off of the top of...