Please read carefully before using your LUCCA Solo. Check out our website for a list of specifications, including accessories and other details on the LUCCA Solo. For setup information, please see the setup guide. Getting Started: After reading...
Step 1: Unboxing and Inspection Remove the machine from the box and place it on a stable, level surface. Before turning on the machine, inspect for damage that may have occurred during shipping. If you notice any damage, contact us immediately....
Tools Needed: Flat head Screwdriver Adjustable Wrench The machine should be unplugged and cool to the touch before you begin. Remove and set aside the cup warming tray and water reservoir. Remove the 5 Phillips screws (2 on each side and 1 on the...
Tools Needed: Phillips Screwdriver Adjustable Wrench 3mm Allen Key Hand Siphon Pump Pitcher or Bucket Remove the panels from the LUCCA Solo. Use the 3mm Allen Key to remove the plug on top of the boiler. 3. Place one hose of the siphon pump into...
If your LUCCA Solo is unable to fully heat or will not power on, check out these draining instructions. Tools needed: Measuring Cup (4-10 fl. oz) Towels Turn the machine on and allow enough time for it to fully heat up. Once the machine has fully...
Tools needed: Flathead Screwdriver Portafilter with the backflush basket The machine will need to be on and fully heated. Remove the cup warming tray from the top of your machine. Start by locking in the portafilter into the group head and lift...