Please read carefully before using your ECM Casa V. If you have any other questions, be sure to contact us. Setup Video Machine Diagram Included Accessories ECM Double Spouted Portafilter Double Basket Single Basket Plastic Tamper Backflush Blank...

<p>Please read carefully before using your <a href="https://clivecoffee.com/products/ecm-casa-v-espresso-machine" rel="noopener" target="_blank">ECM Casa V</a>.</p><h3 id="setup-video">Setup Video</h3><div><div class="embed-component"><span class="fr-video fr-deletable fr-rv fr-fvc fr-dvb fr-draggable" contenteditable="false" draggable="true"><iframe width="100%" src="https://www.youtube.com/embed/uQabNM11eO8?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe></span><br></div></div><h3 id="machine-diagram"><strong>Machine Diagram&#xA0;</strong></h3><figure class="hs-align-center"><img alt="ECM Casa V: User Manual" class="hs-image-align-none fr-fic fr-dii" src="https://cdn2.hubspot.net/hubfs/4309359/ECM_CasaV-01.jpg"></figure><h3 id="included-accessories"><strong>Included Accessories</strong></h3><ul><li>ECM Double Spouted Portafilter</li><li>Double Basket</li><li>Single Basket</li><li>Plastic Tamper</li><li>Backflush Blank</li><li>Grouphead Brush</li><li>Water Test Strips</li></ul><h3 id="water">Water</h3><p>Espresso machines have specific requirements when it comes to water. There are two primary considerations: filtration and hardness.</p><p>Filtration gets rid of tiny particles, such as sand or rust, in your water. If these particles were allowed to enter your machine they could cause all manner of trouble, particularly by clogging the precise valves and mechanisms in your espresso machine. Almost any water filter will do the job, whether it&#x2019;s the one built into your fridge, a Brita, or a whole house filter. Ensuring that this filter is replaced in proper time will be important to ensure machine health.</p><p>Water hardness is equally important. First, use the water hardness test strips included with your machine to test the water you plan to use with your machine. Ideally, we want a hardness of between 35-85 ppm (parts per million). Hardness refers to the dissolved solids in your water. Common dissolved solids are things like magnesium, calcium, and various forms of sodium. These dissolved solids are what make water, and therefore espresso, taste good. But too much will result in scale buildup in your machine. Scale can cause irreparable damage to your machine by clogging and forming a mineralized layer over the surface of metal parts. The process of descaling is even more damaging, eating away at the machines metal internals. Luckily, scale can be entirely avoided by keeping your water hardness within the recommended TDS range of 35-85 ppm.</p><p>There are numerous methods to soften your water should its dissolved solid content be too high.</p><p><strong>A note on RO (Reverse Osmosis) or Distilled Water</strong></p><p>Taste aside, espresso machines require some mineral content in order to function properly. Their steam boiler fill probes, in particular, use the conductivity of water to detect the water level. With no dissolved solids, they&#x2019;ll overfill, giving you water instead of steam. You <strong>must</strong> add some mineral content back in. Our recommendation is <a href="https://clivecoffee.com/products/third-wave-water-packets-12-pack">Third Wave Water packets</a> which are designed to offer ideal flavor and to be safe for your machine.</p><p><strong>Reservoir Solutions</strong></p><p>Our first recommendation is an <a href="https://clivecoffee.com/products/oscar-water-softening-pouch">in-reservoir water softening pouch</a>. They&#x2019;re affordable, last 4-6 months, and are very effective. Using RO water purchased by the gallon in combination with <a href="https://clivecoffee.com/products/third-wave-water-packets-12-pack">Third Wave Water packets</a> is another great option.</p><p>No matter what solution you pick we recommend testing the water coming from your machine&#x2019;s group head every few months. City water hardness changes seasonally and softening systems wear out. Routine testing will ensure you keep your machine safe.</p><h3 id="filling-the-reservoir"><strong>Filling the Reservoir</strong></h3><ul><li>The Casa V operates on a 3-liter water reservoir located under the rear tray.</li><li>Use soft potable water only and do not operate the machine without water.</li><li>Your 3 Liter reservoir will make approximately 25-30 drinks before needing to be refilled.</li><li>To fill reservoir:<ul><li>Remove the rear tray and fill reservoir while seated in the machine</li><li>Alternately you can remove the reservoir from the machine to fill.</li><li>Fill reservoir to about an inch below the top of the tank.</li><li>Reseat tank in the same orientation that it was removed.</li></ul></li></ul><figure class="hs-align-center"><img alt="ECM Casa V: User Manual" class="hs-image-align-none fr-fic fr-dii" src="https://cdn2.hubspot.net/hubfs/4309359/IMG_20171004_154029.jpg"></figure><figure class="hs-align-center"><img alt="ECM Casa V: User Manual" class="hs-image-align-none fr-fic fr-dii" src="https://cdn2.hubspot.net/hubfs/4309359/IMG_20171004_154100.jpg"></figure><ul><li>This machine does not have a magnetic float or sensor.</li><li>The Casa V is a reservoir only model.</li></ul><h3 id="powering-on-your-machine"><strong>Powering on your Machine&#xA0;</strong></h3><ul><li>Your machine is set for use on a 110v outlet.</li><li>Prior to starting the machine, check all four buttons to ensure they are in the off/closed position (buttons clicked out), and the drip tray is inserted accurately.</li><li>Plug the machine directly into a grounded socket, do not use an extension cord or multiple socket.</li><li>The main power On/Off button is located just below the green power lamp. Clicked In is on and you will see the green led illuminate; Clicked Out is off, you will see the green led light and machine power off.</li><li>**FIRST TIME STARTUP: BEGIN FILLING BOILER AS SOON AS MACHINE IS POWERED ON** Follow the first time startup instructions below to fill your boiler.</li></ul><h3 id="first-time-startup"><strong>First Time Startup</strong></h3><ul><li>Following the steps above, fill your water reservoir, plug in the machine, and turn power on (Clicked In).</li><li>**BEGIN FILLING BOILER AS SOON AS MACHINE IS POWERED ON** The heating elements begin heating once the machine is powered on.</li><li>To fill your boiler at initial startup place the steam tip into an empty pitcher or directed into the drip tray, twist the black knob counter-clockwise to open the steam valve. At the same time engage the pump by pressing the coffee brew button (Clicked In).</li><li>Let pump run until you see water coming out of both the group head and the steam wand.</li><li>Twist the black knob clockwise to close the steam valve and turn off brew button (Click Out).</li><li>A large amount of water is required for the first filling of the boiler, you can expect to refresh the water tank with water during this start up process.</li><li>The machine is now ready to brew coffee.</li></ul><h3 id="switching-from-coffee-to-steam"><strong>Switching from Coffee to Steam</strong></h3><ul><li>When the machine is in coffee brewing mode (Main power on and all other buttons are closed/off), your boiler will heat to a preset temperature around 200F, the ideal coffee brewing temperature.</li><li>To switch over to the steam setting you will be heating the boiler up to a preset temperature around 250F, you will also need to drain some water from the boiler to allow room for the steam to build up.</li><li>Turn on steam mode button (Clicked In), place the steam tip into pitcher or drip tray, and open up the steam wand turning the knob counter-clockwise. You will see the orange indicator lamp illuminate.</li><li>Keep the wand open and drain water from the boiler until you begin to see sputtering water and some steam building. Turn off the wand once the sputtering has nearly turned into steam.</li><li>Wait for the orange light to turn off (once it has heated to about 250F it will stop heating), at this point, you are ready to steam your milk.</li><li>After you have completed your milk steaming, wipe down your steam wand and turn off the steam boiler mode button (Click Out).</li><li>Place the steam tip into an empty pitcher or drip tray and open up the steam wand turning the knob counter-clockwise to release steam, at the same time turn on the coffee brew button (Clicked In).</li><li>Wait for water to refill the boiler and begin flowing from steam tip and group head. Once water is flowing at full capacity turn off the brew button (Clicked Out) and turn off the steam wand turning the knob clockwise.</li><li>Wait for the orange light to turn off to indicate ideal brew temperature of 200F before pulling your next shot of espresso.</li><li>If the machine will be idle for any period of time it best to leave it in coffee brewing mode or powered off.</li></ul><h3 dir="ltr" id="isPasted"><span style="text-decoration:none;">Additional Resources:&#xA0;</span></h3><p dir="ltr"><span style="text-decoration:none;">If you need help dialing in your equipment or pulling shots, check out the articles below or&#xA0;</span><a href="https://clivecoffee.com/pages/contact" style="text-decoration:none;"><span style="text-decoration:underline;">contact our coffee experts and technicians</span></a><span style="text-decoration:none;">.</span></p><ul><li dir="ltr"><a href="https://clivecoffee.com/blogs/learn/how-to-make-great-espresso" style="text-decoration:none;"><span style="text-decoration:underline;"><u>How to Pull the Perfect Shot</u></span></a></li><li dir="ltr"><u><a href="https://help.clivecoffee.com/en-US/dialing-in-your-grinder-883801" style="text-decoration:none;"><span style="text-decoration:underline;">Dialing In Your Grinder</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/products/home-barista-online-intro-to-espresso" style="text-decoration:none;"><span style="text-decoration:underline;">Coffee School: Intro to Espresso</span></a></u><span style="text-decoration:none;"><u>&#xA0;</u></span></li><li dir="ltr"><u><a href="https://help.clivecoffee.com/en-US/articles/getting-started-203675" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Help Center: Getting Started</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/blogs/learn/espresso-machine-cleaning-maintenance" style="text-decoration:none;"><span style="text-decoration:underline;">Cleaning &amp; Maintenance</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/blogs/learn" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Coffee: Blogs &amp; Videos</span></a></u></li><li><a href="https://clivecoffee.imagerelay.com/share/e1e475a5c86b46d9b8c2e02dab032a03" rel="noopener" target="_blank"><u>Manufacturer Manual in PDF</u></a></li></ul><p><br></p>

ECM Casa V: User Manual

Step 1: Inspect the box and the machine for damage Remove the machine from the box and place it on a stable, level surface. Before turning on the machine, inspect for damage that may have occurred during shipping. If you notice any damage, contact...

<p>&#xA0;</p><div><div class="embed-component"><iframe allowfullscreen="allowfullscreen" height="314" src="//www.youtube.com/embed/uQabNM11eO8" style="margin: 10px auto; display: block; clear: both;" width="560"></iframe></div></div><h3 id="step-1-inspect-the-box-and-the-machine-for-damage">Step 1: Inspect the box and the machine for damage</h3><ul><li>Remove the machine from the box and place it on a stable, level surface.</li><li>Before turning on the machine, inspect for damage that may have occurred during shipping. If you notice any damage, <a href="https://clivecoffee.com/pages/contact" rel="noopener" target="_blank">contact us immediately</a>.</li><li>Save all packaging as this is needed for <a href="https://clivecoffee.com/pages/returns-and-exchanges" rel="noopener" target="_blank">returns</a> and <a href="https://clivecoffee.com/pages/espresso-machine-repair-service" rel="noopener" target="_blank">repairs</a>.</li></ul><h3 id="step-2-water-quality">Step 2: Water Quality</h3><ul><li>Before introducing any water to the machine, it&#x2019;s important to test it to make sure it is adequately soft</li><li>Use the included water test strip to verify the softness of your water. Ideally, we&#x2019;re looking for a softness below 50 ppm.</li><li>For more information on water, take a look at CliveCoffee.com/water or click the link in the description of this video.</li><li>Once you have verified your water is adequately softened and filtered, fill the machine&#x2019;s removeable water reservoir, ensuring that the floating fill indicator remains in place at the bottom of the reservoir.</li><li>Step 3: Filling your boilers and turning on the machine</li><li>Plug in your machine using either the standard plug or the converter cord supplied with the machine.</li><li>Once the machine is is plugged in, place a small pitcher under the steam wand and turn the steam knob a few times counter clockwise to open the steam wand.</li><li>Now turn the machine on and immediately depress the brew button. This will activate the pump and begin filling the boiler with water. Let the pump run until you see water coming from both the steam wand and group head. This should take less than one minute.</li><li>Turn the steam knob clockwise to stop the flow of water and deactivate the brew button.</li><li>You&#x2019;ve used a lot of water, so now is a good time to refill the water reservoir.</li><li>Once you see the heating light turn off you&#x2019;ll know that the machine is up to temp.</li><li>At this point, your machine is ready to pull your first shots.</li></ul><h3 id="step-4-steaming-milk">Step 4: Steaming Milk</h3><ul><li>The ECM Casa V is a single boiler, so to steam milk you&#x2019;ll have to switch it to steam mode.</li><li>Press the steam button. You&#x2019;ll have to remove some water from the boiler to make room for steam. Rotate the steam knob counterclockwise to open it and, for five seconds, purge the water into a small pitcher. Wait 20 seconds, and purge the steam wand for another 5 seconds. Wait another 20 seconds and then purge the steam wand a final time. By now you should be seeing plenty of steam coming out of the steam wand. Feel free to to close the steam wand.</li><li>Insert the steam wand into your milk and open the steam wand.</li></ul><h3 dir="ltr" id="isPasted"><span style="text-decoration:none;">Additional Resources:&#xA0;</span></h3><p dir="ltr"><span style="text-decoration:none;">If you need help dialing in your equipment or pulling shots, check out the articles below or&#xA0;</span><a href="https://clivecoffee.com/pages/contact" style="text-decoration:none;"><span style="text-decoration:underline;">contact our coffee experts and technicians</span></a><span style="text-decoration:none;">.</span></p><ul><li dir="ltr"><a href="https://clivecoffee.com/blogs/learn/how-to-make-great-espresso" style="text-decoration:none;"><span style="text-decoration:underline;">How to Pull the Perfect Shot</span></a></li><li dir="ltr"><a href="https://help.clivecoffee.com/en-US/dialing-in-your-grinder-883801" style="text-decoration:none;"><span style="text-decoration:underline;">Dialing In Your Grinder</span></a></li><li dir="ltr"><a href="https://clivecoffee.com/products/home-barista-online-intro-to-espresso" style="text-decoration:none;"><span style="text-decoration:underline;">Coffee School: Intro to Espresso</span></a><span style="text-decoration:none;">&#xA0;</span></li><li dir="ltr"><a href="https://help.clivecoffee.com/en-US/articles/getting-started-203675" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Help Center: Getting Started</span></a></li><li dir="ltr"><a href="https://clivecoffee.com/blogs/learn/espresso-machine-cleaning-maintenance" style="text-decoration:none;"><span style="text-decoration:underline;">Cleaning &amp; Maintenance</span></a></li><li dir="ltr"><a href="https://clivecoffee.com/blogs/learn" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Coffee: Blogs &amp; Videos</span></a></li></ul><p>&#xA0;</p>

ECM Casa V Espresso Machine: Setup Guide

Clive Coffee

Getting Started

ECM Casa V

Plumbing an Espresso Machine for Flojet Installation

Water Filter and Softener System Installation

The Importance of Water Composition in Espresso

Formatting Examples

How Water Affects Your Espresso Machine

Upgrading your Water Softener Cartridge from 2 Cartridges to 1

How Water Can Make or Break Your Coffee

Water

Using Grindz to Clean Your Grinder

Dialing In Your Grinder

Jammed Burrs in your Espresso Grinder

How to Clean Your Grinder

Espresso Tech 101: Testing a Motor Capacitor

Grinder Cleaning & Maintenance

Espresso Tech 101: Basic Bench Testing

Removing and Cleaning Group Head Screens

How to Clean and Backflush E61 Group Head Machines

Understanding Your Brew Pressure Gauge

Using Rinza to Clean Your Steam Wand

Steam / Hot Water Leak: Diagnosis & Repair

PID Settings and Clive Recommended Settings

How to Clean and Backflush (non-E61 Group Head) Espresso Machines

E61 Cam Lubrication for Sticky/Squeaky Brew Lever

Water: Descaling Your Espresso Machine

E61 Gicleur Inspection and Cleaning

Cup Ratings; What do they mean?

Espresso Tech 101: Vibratory Pump Re-Priming

Espresso Machine Cleaning & Maintenance

Espresso Brew Ratios From La Marzocco

What is Channeling?

How to Pull the Perfect Shot of Espresso

Single baskets: What's the deal?

How to Tamp (Correctly)

Brew Ratios, Basket Sizes, and the Confusion over a "Double Shot"

Clive's Flow Control Recipe

Coffee & Pulling Shots

Steam Wand Tips and Milk Steaming Speed

How to Make Latte Art

How to Steam Milk

Steaming Milk

Espresso 101

La Marzocco: Receiving Your Espresso Machine

Unboxing Your Machine

Machine Serial Number Locations

Unboxing

Repackaging the ECM Synchronika

Repackaging the Profitec Pro 700

Repackaging the LUCCA A53/A53 Mini (Vivaldi II/Mini Vivaldi II)

Repackaging the LUCCA A53/A53 Mini (Vivaldi II/Mini Vivaldi II) with Instapack

Repackaging the Profitec Pro 300

Repackaging the ECM Casa V

Repackaging the LUCCA M58

Repackaging a QM67 in Pro 500 Box

Repackaging the ECM Classika

Repackaging the Profitec Pro 600

Repackaging the Rancilio Silvia Pro or Pro X

Repackaging the Profitec Pro 500

Repackaging the Profitec Pro 800

Repackaging the ECM Puristika

Repacking the Lelit Mara X

Repackaging the Lelit Bianca

Repackaging the Lelit Elizabeth

Repackaging the Eureka Atom 65 / 75

Repackaging the Bezzera Duo DE/MN

Repackaging the Bezzera BZ10

Repackaging the Alex Duetto

Repackaging the Eureka Zenith

Repackaging the Macap M7D

Repackaging the Profitec T64

Repackaging Instructions

Clive Coffee Warranty

Repairs

Getting Warranty Service

Clive Coffee 1-year Commercial Warranty

Espresso Machine: Need Technical Assistance?

Grinders: Need Technical Assistance?

Warranty and Repairs

Credit Card Charges for Espresso Machines

Free ground shipping over $75

Changes, Holds, or Pick-Up Requests to Orders

How do I modify an order once it's been placed?

Returns & Exchanges

How to track a freight shipment

Order Changes, Returns, Shipping & Payment

Warranty, Ordering & Returns

Open Box vs Certified Pre-Owned

Trade-In Program Details

Open Box, Certified Pre-Owned & Trade-In Program

LUCCA A53 Mini: Using Pre-Infusion

LUCCA A53 Mini / Mini Vivaldi II: Draining the Boiler

LUCCA A53 Mini: User Manual

LUCCA A53 Mini: Setup Guide Video

LUCCA A53 Mini / Mini Vivaldi: Adjusting The Expansion Valve

LUCCA A53 Mini / Mini Vivaldi: Vacuum Breaker

LUCCA A53 Mini / Mini Vivaldi: Cleaning the Fill Probe

LUCCA A53 Mini / Mini Vivaldi: Replacing Safety Valve

LUCCA A53 Mini / Mini Vivaldi: Steam Boiler Temperature Sensor Cleaning and Replacement

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Cleaning or Replacing Group Head Solenoid (pre-2019)

LUCCA A53 Mini / Mini Vivaldi: Cleaning Fill Solenoid

LUCCA A53 / A53 Mini / Vivaldi: Group Head Cleaning and Maintenance

LUCCA A53 Mini / Mini Vivaldi: Hot Water Solenoid Disassembly

LUCCA A53 Mini / Mini Vivaldi: Cleaning Flow Meter

LUCCA A53 Mini / Mini Vivaldi: Cleaning Fill Probe and Sealing Boiler Connection

LUCCA A53 Mini / Mini Vivaldi: Inspecting and Cleaning the Water Tank Check Valve

LUCCA A53 Mini / Mini Vivaldi: Inspecting Inlet Tubing

Lucca A53 Mini / Mini Vivaldi: Expansion Valve (OPV) Service and Replacement

Cleaning/Maintenance

LUCCA A53 Mini: Steam Boiler Over-pressurizing

LUCCA A53 Mini / Mini Vivaldi: Vibratory Pump Replacement

LUCCA A53 Mini: No Water From Group Head

LUCCA A53 Mini: Machine Not Turning On

LUCCA A53 Mini / Mini Vivaldi: OPV / Steam Gauge Fitting Leak

LUCCA A53 Mini: Priming the pump

LUCCA A53 Mini: Steam Boiler Not Heating

LUCCA A53 Mini / Mini Vivaldi: Replacing the Steam Lever

LUCCA A53 Mini: No Hot Water From Water Tap

LUCCA A53 Mini / Mini Vivaldi: Pump Pressure Gauge Vibration/Oscillation

LUCCA A53 / A53 Mini: Flowmeter Error / Volumetric Dosing problems

LUCCA A53 / A53 Mini: Machine Tripping the GFCI

LUCCA A53 Mini: Draining Steam Boiler With No Drain Nut

LUCCA A53 / A53 Mini: 15 & 20 Amp Power Modes

LUCCA A53 Mini / Mini Vivaldi: Replacing the Pressure Gauge

LUCCA A53/A53 Mini: SSR (Solid State Relay) Replacement

Lucca A53 Mini / Mini Vivaldi: Replace Magnet Float

Lucca A53 Mini: Force-flushing the Group Head

LUCCA A53 Mini / La Spaziale Mini Vivaldi: Fuse Housing Inspection and Replacement

General Troubleshooting

LUCCA A53 Mini: Programming Steam Boiler On/Off

LUCCA A53 / A53 Mini: Programming Volumetric Settings

LUCCA A53 / A53 Mini: Programming Steam Temperature Settings

Programming

LUCCA A53 / A53 Mini: Drying Inside of Temp Probe

LUCCA A53 Mini / Mini Vivaldi: Removing Steam Boiler Fill Valve

LUCCA A53 Mini: Steam Valve Assembly Replacement

Steam Boiler Maintenance/Troubleshooting

LUCCA A53 Mini / Mini Vivaldi: Replacing Coffee Boiler Temperature Probe

LUCCA A53 / Mini / Vivaldi: Testing the Coffee Boiler Temperature Sensor

Brew Boiler Maintenance and Troubleshooting

LUCCA A53 Mini / Mini Vivaldi: Removing the Front Panel

LUCCA A53 / A53 Mini: Installing Wood Panels

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Side & Front Panel Alignment

LUCCA A53 / Mini / Vivaldi: Panel Removal

Panel Removal and Installation

LUCCA A53 Mini: Installing Drip Tray Drain

LUCCA A53 Mini: Installing a Pre-Infusion Chamber

Install Upgrades

LUCCA A53 Mini/Mini Vivaldi

LUCCA A53: Draining the Boilers

LUCCA A53 Espresso Machine: Setup Guide

LUCCA A53: User Manual

LUCCA A53: Guide to Error Codes

LUCCA A53 / La Spaziale Vivaldi: Fuse Housing Inspection and Replacement

LUCCA A53 / Vivaldi: Misaligned Pressure Gauge

LUCCA A53 / La Spaziale Vivaldi: Rotary Pump Pressure Adjustment

LUCCA A53 / Vivaldi: Fuse Inspection

LUCCA A53 / Vivaldi: Expansion Valve Adjustment and Seat Replacement

LUCCA A53 / Vivaldi: Accessing Main Computer (CPU)

LUCCA A53 / Vivaldi: 15 & 20 Amp Power Modes

LUCCA A53 / Vivaldi: Replacing Rotary Pump

General Maintenance

LUCCA A53 / Vivaldi: Cleaning the Flow Meter Gicleur

LUCCA A53 / Mini / Vivaldi: Cleaning Hot Water Tap Tubing

LUCCA A53 / Vivaldi: Cleaning Fill Solenoid

LUCCA A53 / Vivaldi: Hot Water Solenoid Disassembly

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Cleaning or Replacing Group Head Solenoid (2019-Present)

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Inspecting and Cleaning Group Head Passages