Important Note on Filling Boilers: It is important to lift the brew lever until water begins to flow from the group head to ensure the brew boiler is entirely full. Missing this step could result in damage to your brew boiler. *Note: If you...

<h3 id="important-note-on-filling-boilers">Important Note on Filling Boilers:</h3><p>It is important to lift the brew lever until water begins to flow from the group head to ensure the brew boiler is entirely full. Missing this step could result in damage to your brew boiler.</p><p>&#xA0;</p><div class="hs-responsive-embed-wrapper hs-responsive-embed" style="width: 100%; height: auto; position: relative; overflow: hidden; max-width: 560px; max-height: 314px; min-width: 256px; margin: 10px auto; display: block; clear: both; padding: 0;"><div class="hs-responsive-embed-inner-wrapper" style="position: relative; overflow: hidden; max-width: 100%; padding-bottom: 56.07%; margin: 0;"><iframe allowfullscreen="allowfullscreen" class="hs-responsive-embed-target-iframe hs-responsive-embed-iframe" data-service="youtube" height="314" src="//www.youtube.com/embed/wVyNwCi5z5w" style="position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: none;" width="560"></iframe></div></div><p>*Note: If you happened to have purchased your M58 prior to December 2018, then you have V1 and <a href="https://youtu.be/P_L0bN61w4k" rel="noopener" target="_blank">this setup video</a> is for you.</p><h3 id="step-1-inspect-the-box-and-the-machine-for-damage"><strong>Step 1: Inspect the box and the machine for damage</strong></h3><ul><li>Remove the machine from the box and place it on a stable, level surface.</li><li>Before turning on the machine, inspect for damage that may have occurred during shipping. If you notice any damage, <a href="https://clivecoffee.com/pages/contact" rel="noopener" target="_blank">contact us immediately</a>.</li><li>Save all packaging as this is needed for <a href="https://clivecoffee.com/pages/returns-and-exchanges" rel="noopener" target="_blank">returns</a> and <a href="https://clivecoffee.com/pages/espresso-machine-repair-service" rel="noopener" target="_blank">repairs</a>.</li></ul><h3 id="step-2-water-quality-and-plumbing-in-your-machine"><strong>Step 2: Water Quality and Plumbing in your machine</strong></h3><ul><li>Before introducing any water to the machine, it&#x2019;s important to test it to make sure it is adequately soft<ul><li style="list-style-type: none;"><ul><li style="list-style-type: none;"><ul><li>Use the included water test strip to verify the softness of your water. Ideally, we&#x2019;re looking for a softness below 50 ppm.</li><li>For more information on water, take a look at <a href="https://clivecoffee.com/blogs/learn/the-importance-of-water-and-your-espresso-machine" rel="noopener">CliveCoffee.com/water</a> or click the link in the description of this video.</li></ul></li></ul></li></ul></li><li>Now that we&#x2019;ve verified your water is adequately softened and filtered, we need to get some water in the machine</li><li>If you plan to direct plumb your machine, fasten the braided line to the pump inlet on the bottom of the machine until it is hand tight, then turn it a quarter turn with an adjustable wrench.</li><li>Open your water line and check for leaks at all the connection points.</li><li>It is important to make sure that the line pressure going into the machine does not exceed <strong>30-45 PSI</strong>. This will help prevent premature wear and potential damage to the machine.</li><li>If you&#x2019;re using the machine&#x2019;s internal reservoir, now would be the time to fill it up</li></ul><h3 id="step-3-filling-your-boilers-and-turning-on-the-machine"><strong>Step 3: Filling your boilers and turning on the machine</strong></h3><ul><ul><li>Plug in your machine</li><li>Flip the two power switches on the front of the machine to turn it on.</li><li>If you&#x2019;re using the machine&#x2019;s internal reservoir, it will automatically begin heating and filling the boiler(s).</li><li>You&#x2019;ll notice that the machine&#x2019;s PID flips between two different numbers. One is the brew boiler and the other is the steam boiler. You can tell the difference between them by the little dot. The brew boiler temp has the dot after the last digit and blinks, and the steam boiler temp has it after the second to last and it&#x2019;s solid.</li><li>You&#x2019;ll know the machine has come to temperature and is ready to pull shots when PID reads 200&#xB0;F for the brew boiler.</li><li>At this point, your machine is ready to pull your first shots. With coffee in your portafilter, lock it into the group head and simply lift the brew lever about 90 degrees to begin pulling espresso.</li><li>If you got our grinder dial-in service, following the proper dose and shot time with the included coffee will give you a near-perfect shot.</li><li>If you didn&#x2019;t, just watch our video detailing how to pull the perfect shot of espresso.</li></ul></ul><h3 id="a-few-tips-before-we-go"><strong>A few tips before we go</strong></h3><ul><li>If you&#x2019;d like to change either boiler&#x2019;s temperature, you can do so using the two buttons on the PID. First, press both buttons at the same time, which will then display &#x201C;T1&#x201D;<ul><li>T1 represents brew boiler temperature. By pressing the right button, you can enter that setting. You&#x2019;ll then see the current target temperature (200 by default).</li><li>By using the two buttons you can increase or decrease the temperature.</li><li>Waiting for a moment will send you back out the main menu, showing &#x201C;T1&#x201D;</li><li>From here, pressing the left button will move you to &#x201C;T2&#x201D;, which represents the steam boiler temperature. You can enter and change this as well.</li><li>Pressing the left button again will exit the menu.</li><li>When it comes to brew temperature, we recommend staying between 195 and 200&#xB0;F, using lower temperatures for darker roasts, and higher temperatures for lighter ones. As always, experimentation is highly encouraged.</li><li>Steam boiler temperature is set to its maximum by default, and it&#x2019;s probably best to leave it there for maximum steaming performance.</li></ul></li></ul><h3 dir="ltr" id="isPasted"><span style="text-decoration:none;">Additional Resources:&#xA0;</span></h3><p dir="ltr"><span style="text-decoration:none;">If you need help dialing in your equipment or pulling shots, check out the articles below or&#xA0;</span><a href="https://clivecoffee.com/pages/contact" style="text-decoration:none;"><span style="text-decoration:underline;">contact our coffee experts and technicians</span></a><span style="text-decoration:none;">.</span></p><ul><li dir="ltr"><a href="https://clivecoffee.com/blogs/learn/how-to-make-great-espresso" style="text-decoration:none;"><span style="text-decoration:underline;"><u>How to Pull the Perfect Shot</u></span></a></li><li dir="ltr"><u><a href="https://help.clivecoffee.com/en-US/dialing-in-your-grinder-883801" style="text-decoration:none;"><span style="text-decoration:underline;">Dialing In Your Grinder</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/products/home-barista-online-intro-to-espresso" style="text-decoration:none;"><span style="text-decoration:underline;">Coffee School: Intro to Espresso</span></a></u><span style="text-decoration:none;"><u>&#xA0;</u></span></li><li dir="ltr"><u><a href="https://help.clivecoffee.com/en-US/articles/getting-started-203675" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Help Center: Getting Started</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/blogs/learn/espresso-machine-cleaning-maintenance" style="text-decoration:none;"><span style="text-decoration:underline;">Cleaning &amp; Maintenance</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/blogs/learn" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Coffee: Blogs &amp; Videos</span></a></u></li><li><a href="https://clivecoffee.com/pages/help-center?hcUrl=%2Fen-US%2Flucca-e61-flow-control-installation-how-it-works-884237"><u>LUCCA Flow Control Installation and Operation Guide</u></a></li></ul><p>&#xA0;</p>

LUCCA M58 Espresso Machine: Setup Guide

Please read carefully before using your LUCCA M58 Espresso Machine. If you have any other questions, be sure to contact us. Setup Video Machine Diagram Included Accessories Double spouted commercial portafilter Bottomless commercial portafilter...

<p>Please read carefully before using your <a href="https://clivecoffee.com/products/lucca-m58-espresso-machine-by-quick-mill" rel="noopener" target="_blank">LUCCA M58 Espresso Machine.</a></p><h3 id="setup-video">Setup Video</h3><div><div class="embed-component"><iframe allowfullscreen="allowfullscreen" height="314" src="//www.youtube.com/embed/P_L0bN61w4k" style="margin: 10px auto; display: block; clear: both;" width="560"></iframe></div></div><p>&#xA0;</p><h3 id="machine-diagram">Machine Diagram</h3><figure><img alt="LUCCA M58 espresso machine User Manual" class="hs-image-align-none fr-fic fr-dii" src="https://cdn2.hubspot.net/hubfs/4309359/Screen%20Shot%202019-01-16%20at%202.12.40%20PM.png" style="height: auto;"></figure><p>&#xA0;</p><h3 id="included-accessories">Included Accessories</h3><ul><li>Double spouted commercial portafilter</li><li>Bottomless commercial portafilter</li><li>Double basket</li><li>Triple basket</li><li>Blind basket</li><li>Cleaning brush</li><li>Direct plumb kit</li><li>15 amp converter cord</li></ul><h3 id="water">Water</h3><p>Espresso machines have specific requirements when it comes to water. There are two primary considerations: filtration and hardness.</p><p>Filtration gets rid of tiny particles, such as sand or rust, in your water. If these particles were allowed to enter your machine they could cause all manner of trouble, particularly by clogging the precise valves and mechanisms in your espresso machine. Almost any water filter will do the job, whether it&#x2019;s the one built into your fridge, a Brita, or a whole house filter. Ensuring that this filter is replaced in proper time will be important to ensure machine health.</p><p>Water hardness is equally important. First, use the water hardness test strips included with your machine to test the water you plan to use with your machine. Ideally, we want a hardness of between 35-85 ppm (parts per million). Hardness refers to the dissolved solids in your water. Common dissolved solids are things like magnesium, calcium, and various forms of sodium. These dissolved solids are what make water, and therefore espresso, taste good. But too much will result in scale buildup in your machine. Scale can cause irreparable damage to your machine by clogging and forming a mineralized layer over the surface of metal parts. The process of descaling is even more damaging, eating away at the machine&apos;s metal internals. Luckily, scale can be entirely avoided by keeping your water hardness within the recommended TDS range of 35-85 ppm.</p><p>There are numerous methods to soften your water should its dissolved solid content be too high.</p><p><strong>A note on RO (Reverse Osmosis) or Distilled Water</strong></p><p>Taste aside, espresso machines require some mineral content in order to function properly. Their steam boiler fill probes, in particular, use the conductivity of water to detect the water level. With no dissolved solids, they&#x2019;ll overfill, giving you water instead of steam. You <strong>must</strong> add some mineral content back in. Our recommendation is <a href="https://clivecoffee.com/products/third-wave-water-packets-12-pack">Third Wave Water packets</a> which are designed to offer ideal flavor and to be safe for your machine.</p><p><strong>Reservoir Solutions</strong></p><p>Our first recommendation is an <a href="https://clivecoffee.com/products/oscar-water-softening-pouch">in-reservoir water softening pouch</a>. They&#x2019;re affordable, last 4-6 months, and are very effective. Using RO water purchased by the gallon in combination with <a href="https://clivecoffee.com/products/third-wave-water-packets-12-pack">Third Wave Water packets</a> is another great option.</p><p><strong>Direct Plumb Solutions</strong></p><p>For machines that are plumbed in, we recommend our <a href="https://clivecoffee.com/products/water-softening-and-filtration-system?ref=">Water Softening and Filtration kit</a>. It includes everything you&#x2019;ll need to ensure the water is safe for your machine and delivers the best taste for your espresso.</p><p>No matter what solution you pick we recommend testing the water coming from your machine&#x2019;s group head every few months. City water hardness changes seasonally and softening systems wear out. Routine testing will ensure you keep your machine safe.</p><h3 id="first-time-setup-with-reservoir">First time setup with reservoir</h3><p>If you are using the machine with its internal reservoir you will first need to set the water source ball valve and low water alarm toggles to the correct positions.</p><p><br>To use the internal water reservoir the ball valve toggle should be pointing toward the middle of the machine and the low water alarm switch should be turned on &#xA0;by setting the toggle to the &quot;O&quot; position as shown in the pictures below:</p><p><img alt="M58_BallValve_Res" class="hs-image-align-center fr-fic fr-dii" height="665" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/M58_BallValve_Res.jpg" style="height: auto; width: 499px;" width="499"></p><p><img alt="M58_Toggle_Res" class="hs-image-align-center fr-fic fr-dii" height="665" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/M58_Toggle_Res.jpg" style="height: auto; width: 499px;" width="499"></p><p>You may then simply fill the reservoir with your filtered and softened water, leaving a few inches at the top to prevent spillage. The reservoir is removable. Ensure that you do not spill water on top of the machine when filling, as this may cause electrical damage.</p><h3 id="first-time-setup-with-water-line">First time setup with water line</h3><p>If you setting up your M58 to be directly plumbed to a water source you will first need to set the water source ball valve and low water alarm toggles to the correct positions.</p><p>To set your M58 to plumb-in mode the ball valve toggle should be pointing toward the outside (right) of the machine and the low water alarm switch should be turned off by setting the toggle to the &quot; - &quot; position as shown in the pictures below:</p><p><img alt="IMG_2389" class="hs-image-align-center fr-fic fr-dii" height="665" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/IMG_2389.jpg" style="height: auto; width: 499px;" width="499"></p><p><img alt="IMG_2387" class="hs-image-align-center fr-fic fr-dii" height="665" src="https://4309359.fs1.hubspotusercontent-na1.net/hubfs/4309359/IMG_2387.jpg" style="height: auto; width: 499px;" width="499"></p><p>Your LUCCA M58 comes with a braided water line that connects to the water inlet on the bottom of the machine and has a 3/8ths OD push connect fitting on the other end to direct connect to a plastic water line. The updated braided lines feature compression fittings to make a watertight seal&#x2014;fiber washers are no longer necessary or included with the Lucca M58. If you plan on plumbing in your own water kit to the braided line that doesn&#x2019;t use a 3/8ths OD plastic tubing you&#x2019;ll need to find an adapter for the braided line as it has a 3/8ths BSPT threaded female connection. Standard pipe thread in North America is NPT thread.<br><br>These machines require 30-45 PSI of line pressure from the plumbed-in water supply to work their best. To little or too much line pressure can cause premature wear and even damage your machine. If you don&apos;t know the line pressure going into your machine, you must install a pressure regulator on the line between the water supply and the machine.</p><h3 id="programming-pid-and-settings">Programming PID and Settings</h3><p>Note - The PID controller and heating lights will turn off when the reservoir is empty.</p><p>There are two programming modes: one while the machine is on, and one while the machine is off:</p><p><em>While the machine is on:</em> press both power buttons at the same time to enter temperature adjustment of the coffee and steam boiler. Setting T1 is for the coffee boiler, setting T2 is for the steam boiler. The left button will cycle from T1 - T2 and then back to standard machine operation. The right button will enter the settings value, display its&#x2019; current value and allow you to change it. If you press the right button while on T1 &#x201C;202&#x201D; (coffee boiler temperature) will display for a couple of seconds. While the value is displayed the left button will drop the value 1 and the right button will raise the value 1.</p><p><em>While the machine is off:&#xA0;</em>hold down the left and right PID buttons and turn on the machine. Hold down the buttons until F. 01 appears. From here the same rules apply for the standard operation programming mode, you can cycle through the menu with the left button and access the settings value with the right button. We highly recommend leaving these value alone as our technicians have set them upon bench testing.</p><p><strong>Advanced PID Settings</strong></p><p>Warning - This section allows the user to change the machine from Fahrenheit to Celsius mode as well as other advanced settings that can greatly affect the performance of the machine.</p><p>These settings have been calibrated using specialized test equipment and should not be changed unless the user has a thorough understanding of how a PID controller operates.</p><figure><img alt="LUCCA M58 espresso machine User Manual" class="hs-image-align-none fr-fic fr-dii" src="https://cdn2.hubspot.net/hubfs/4309359/advanced%20pid%20settings%20lucca%20m58.png" style="height: auto;"></figure><p>&#xA0;</p><p>To get into the advanced programming&#xA0;mode, with the machine turned off hold&#xA0;down both left/right buttons&#xA0;simultaneously and then turn the machine&#xA0;on. Keep holding the left/right buttons&#xA0;until the display reads F.01 and then&#xA0;release the buttons.&#xA0;Use the left button to cycle through parameters and then use the right button to select a&#xA0;parameter to change. Then use the left/right button to change the selected parameter.</p><p>To save the new changes turn the machine off and then back on again.</p><p>F.02 Mode Setting - By default the F.02 setting has been set to 4 (15 amp mode) to give priority to the coffee boiler. The setting can also be set to 6 (20 amp mode) to give power to both boilers.* This can be helpful if you are steaming larger quantities of milk and desire more steam capacity. If you change the F.02 setting to 6 to power to both boilers, then both power switches must be on for the machine to operate or neither boiler will heat up.</p><p>*Note: 20 amp mode is a setting only available on the V1 M58 models, the V2 M58 does not have 20 amp capability, therefore &quot;6&quot; will not appear in the F.02 settings list.</p><p>E1/E2 Offset Setting - The coffee boiler offset setting has been calibrated using a special Scace device and should not be changed. The steam boiler offset setting is set to 0&#xB0; by default. It can be changed up to 5&#xB0; to increase the steam pressure, but the pressure may vary at higher elevations so make sure it does not exceed 2 bars of pressure or damage may occur.</p><h3 id="technical-details">Technical Details</h3><p>For a complete list of technical details, please see the spec table on our <a href="https://clivecoffee.com/products/lucca-m58-espresso-machine-by-quick-mill" rel="noopener" target="_blank">product page.</a></p><h3 dir="ltr" id="isPasted"><span style="text-decoration:none;">Additional Resources:&#xA0;</span></h3><p dir="ltr"><span style="text-decoration:none;">If you need help dialing in your equipment or pulling shots, check out the articles below or&#xA0;</span><a href="https://clivecoffee.com/pages/contact" style="text-decoration:none;"><span style="text-decoration:underline;">contact our coffee experts and technicians</span></a><span style="text-decoration:none;">.</span></p><ul><li dir="ltr"><a href="https://clivecoffee.com/blogs/learn/how-to-make-great-espresso" style="text-decoration:none;"><span style="text-decoration:underline;"><u>How to Pull the Perfect Shot</u></span></a></li><li dir="ltr"><u><a href="https://help.clivecoffee.com/en-US/dialing-in-your-grinder-883801" style="text-decoration:none;"><span style="text-decoration:underline;">Dialing In Your Grinder</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/products/home-barista-online-intro-to-espresso" style="text-decoration:none;"><span style="text-decoration:underline;">Coffee School: Intro to Espresso</span></a></u><span style="text-decoration:none;"><u>&#xA0;</u></span></li><li dir="ltr"><u><a href="https://help.clivecoffee.com/en-US/articles/getting-started-203675" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Help Center: Getting Started</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/blogs/learn/espresso-machine-cleaning-maintenance" style="text-decoration:none;"><span style="text-decoration:underline;">Cleaning &amp; Maintenance</span></a></u></li><li dir="ltr"><u><a href="https://clivecoffee.com/blogs/learn" style="text-decoration:none;"><span style="text-decoration:underline;">Clive Coffee: Blogs &amp; Videos</span></a></u></li><li><a href="https://clivecoffee.com/pages/help-center?hcUrl=%2Fen-US%2Flucca-e61-flow-control-installation-how-it-works-884237"><u>LUCCA Flow Control Installation and Operation Guide</u></a></li></ul><h3 id><br></h3><p><br></p>

LUCCA M58: User Manual

Clive Coffee

Getting Started

LUCCA

LUCCA M58 by Quick Mill

Plumbing an Espresso Machine for Flojet Installation

Water Filter and Softener System Installation

The Importance of Water Composition in Espresso

Formatting Examples

How Water Affects Your Espresso Machine

Upgrading your Water Softener Cartridge from 2 Cartridges to 1

How Water Can Make or Break Your Coffee

Water

Using Grindz to Clean Your Grinder

Dialing In Your Grinder

Jammed Burrs in your Espresso Grinder

How to Clean Your Grinder

Espresso Tech 101: Testing a Motor Capacitor

Grinder Cleaning & Maintenance

Espresso Tech 101: Basic Bench Testing

Removing and Cleaning Group Head Screens

How to Clean and Backflush E61 Group Head Machines

Understanding Your Brew Pressure Gauge

Using Rinza to Clean Your Steam Wand

Steam / Hot Water Leak: Diagnosis & Repair

PID Settings and Clive Recommended Settings

How to Clean and Backflush (non-E61 Group Head) Espresso Machines

E61 Cam Lubrication for Sticky/Squeaky Brew Lever

Water: Descaling Your Espresso Machine

E61 Gicleur Inspection and Cleaning

Cup Ratings; What do they mean?

Espresso Tech 101: Vibratory Pump Re-Priming

Espresso Machine Cleaning & Maintenance

Espresso Brew Ratios From La Marzocco

What is Channeling?

How to Pull the Perfect Shot of Espresso

Single baskets: What's the deal?

How to Tamp (Correctly)

Brew Ratios, Basket Sizes, and the Confusion over a "Double Shot"

Clive's Flow Control Recipe

Coffee & Pulling Shots

Steam Wand Tips and Milk Steaming Speed

How to Make Latte Art

How to Steam Milk

Steaming Milk

Espresso 101

La Marzocco: Receiving Your Espresso Machine

Unboxing Your Machine

Machine Serial Number Locations

Unboxing

Repackaging the ECM Synchronika

Repackaging the Profitec Pro 700

Repackaging the LUCCA A53/A53 Mini (Vivaldi II/Mini Vivaldi II)

Repackaging the LUCCA A53/A53 Mini (Vivaldi II/Mini Vivaldi II) with Instapack

Repackaging the Profitec Pro 300

Repackaging the ECM Casa V

Repackaging the LUCCA M58

Repackaging a QM67 in Pro 500 Box

Repackaging the ECM Classika

Repackaging the Profitec Pro 600

Repackaging the Rancilio Silvia Pro or Pro X

Repackaging the Profitec Pro 500

Repackaging the Profitec Pro 800

Repackaging the ECM Puristika

Repacking the Lelit Mara X

Repackaging the Lelit Bianca

Repackaging the Lelit Elizabeth

Repackaging the Eureka Atom 65 / 75

Repackaging the Bezzera Duo DE/MN

Repackaging the Bezzera BZ10

Repackaging the Alex Duetto

Repackaging the Eureka Zenith

Repackaging the Macap M7D

Repackaging the Profitec T64

Repackaging Instructions

Clive Coffee Warranty

Repairs

Getting Warranty Service

Clive Coffee 1-year Commercial Warranty

Espresso Machine: Need Technical Assistance?

Grinders: Need Technical Assistance?

Warranty and Repairs

Credit Card Charges for Espresso Machines

Free ground shipping over $75

Changes, Holds, or Pick-Up Requests to Orders

How do I modify an order once it's been placed?

Returns & Exchanges

How to track a freight shipment

Order Changes, Returns, Shipping & Payment

Warranty, Ordering & Returns

Open Box vs Certified Pre-Owned

Trade-In Program Details

Open Box, Certified Pre-Owned & Trade-In Program

LUCCA A53 Mini: Using Pre-Infusion

LUCCA A53 Mini / Mini Vivaldi II: Draining the Boiler

LUCCA A53 Mini: User Manual

LUCCA A53 Mini: Setup Guide Video

LUCCA A53 Mini / Mini Vivaldi: Adjusting The Expansion Valve

LUCCA A53 Mini / Mini Vivaldi: Vacuum Breaker

LUCCA A53 Mini / Mini Vivaldi: Cleaning the Fill Probe

LUCCA A53 Mini / Mini Vivaldi: Replacing Safety Valve

LUCCA A53 Mini / Mini Vivaldi: Steam Boiler Temperature Sensor Cleaning and Replacement

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Cleaning or Replacing Group Head Solenoid (pre-2019)

LUCCA A53 Mini / Mini Vivaldi: Cleaning Fill Solenoid

LUCCA A53 / A53 Mini / Vivaldi: Group Head Cleaning and Maintenance

LUCCA A53 Mini / Mini Vivaldi: Hot Water Solenoid Disassembly

LUCCA A53 Mini / Mini Vivaldi: Cleaning Flow Meter

LUCCA A53 Mini / Mini Vivaldi: Cleaning Fill Probe and Sealing Boiler Connection

LUCCA A53 Mini / Mini Vivaldi: Inspecting and Cleaning the Water Tank Check Valve

LUCCA A53 Mini / Mini Vivaldi: Inspecting Inlet Tubing

Lucca A53 Mini / Mini Vivaldi: Expansion Valve (OPV) Service and Replacement

Cleaning/Maintenance

LUCCA A53 Mini: Steam Boiler Over-pressurizing

LUCCA A53 Mini / Mini Vivaldi: Vibratory Pump Replacement

LUCCA A53 Mini: No Water From Group Head

LUCCA A53 Mini: Machine Not Turning On

LUCCA A53 Mini / Mini Vivaldi: OPV / Steam Gauge Fitting Leak

LUCCA A53 Mini: Priming the pump

LUCCA A53 Mini: Steam Boiler Not Heating

LUCCA A53 Mini / Mini Vivaldi: Replacing the Steam Lever

LUCCA A53 Mini: No Hot Water From Water Tap

LUCCA A53 Mini / Mini Vivaldi: Pump Pressure Gauge Vibration/Oscillation

LUCCA A53 / A53 Mini: Flowmeter Error / Volumetric Dosing problems

LUCCA A53 / A53 Mini: Machine Tripping the GFCI

LUCCA A53 Mini: Draining Steam Boiler With No Drain Nut

LUCCA A53 / A53 Mini: 15 & 20 Amp Power Modes

LUCCA A53 Mini / Mini Vivaldi: Replacing the Pressure Gauge

LUCCA A53/A53 Mini: SSR (Solid State Relay) Replacement

Lucca A53 Mini / Mini Vivaldi: Replace Magnet Float

Lucca A53 Mini: Force-flushing the Group Head

LUCCA A53 Mini / La Spaziale Mini Vivaldi: Fuse Housing Inspection and Replacement

General Troubleshooting

LUCCA A53 Mini: Programming Steam Boiler On/Off

LUCCA A53 / A53 Mini: Programming Volumetric Settings

LUCCA A53 / A53 Mini: Programming Steam Temperature Settings

Programming

LUCCA A53 / A53 Mini: Drying Inside of Temp Probe

LUCCA A53 Mini / Mini Vivaldi: Removing Steam Boiler Fill Valve

LUCCA A53 Mini: Steam Valve Assembly Replacement

Steam Boiler Maintenance/Troubleshooting

LUCCA A53 Mini / Mini Vivaldi: Replacing Coffee Boiler Temperature Probe

LUCCA A53 / Mini / Vivaldi: Testing the Coffee Boiler Temperature Sensor

Brew Boiler Maintenance and Troubleshooting

LUCCA A53 Mini / Mini Vivaldi: Removing the Front Panel

LUCCA A53 / A53 Mini: Installing Wood Panels

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Side & Front Panel Alignment

LUCCA A53 / Mini / Vivaldi: Panel Removal

Panel Removal and Installation

LUCCA A53 Mini: Installing Drip Tray Drain

LUCCA A53 Mini: Installing a Pre-Infusion Chamber

Install Upgrades

LUCCA A53 Mini/Mini Vivaldi

LUCCA A53: Draining the Boilers

LUCCA A53 Espresso Machine: Setup Guide

LUCCA A53: User Manual

LUCCA A53: Guide to Error Codes

LUCCA A53 / La Spaziale Vivaldi: Fuse Housing Inspection and Replacement

LUCCA A53 / Vivaldi: Misaligned Pressure Gauge

LUCCA A53 / La Spaziale Vivaldi: Rotary Pump Pressure Adjustment

LUCCA A53 / Vivaldi: Fuse Inspection

LUCCA A53 / Vivaldi: Expansion Valve Adjustment and Seat Replacement

LUCCA A53 / Vivaldi: Accessing Main Computer (CPU)

LUCCA A53 / Vivaldi: 15 & 20 Amp Power Modes

LUCCA A53 / Vivaldi: Replacing Rotary Pump

General Maintenance

LUCCA A53 / Vivaldi: Cleaning the Flow Meter Gicleur

LUCCA A53 / Mini / Vivaldi: Cleaning Hot Water Tap Tubing

LUCCA A53 / Vivaldi: Cleaning Fill Solenoid

LUCCA A53 / Vivaldi: Hot Water Solenoid Disassembly

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Cleaning or Replacing Group Head Solenoid (2019-Present)

LUCCA A53 / A53 Mini / Vivaldi / Mini Vivaldi: Inspecting and Cleaning Group Head Passages