Before doing this we recommend unplugging the machine. Tools required: 2.5mm allen wrench multimeter(optional) NOTE: Depending on the model year, your Casa may have two (2) additional screws along the back of the top panel. Those will need to be...
Please note that the video below highlights the Pro 300, but these processes will be the same for your Casa V. The Group Head Maintenance Kit can be purchased on our website.
Tools Needed:- 2.5mm Hex driver or Allen key -19mm crescent wrench - Large adjustable wrench - Small towel 1. Remove the cup tray, water reservoir cover, and top panel. 2. Pull the knob straight back to remove it from the valve spindle. 3. Lay a...
Tools Needed:- Flat-bladed screwdriver- 2.5mm hex driver or Allen key1. Remove the top panel .2. Identify the steam and brew thermostats. 3. The thermostats should be screwed into the top of the boiler no more than hand tight. Gently, but firmly,...
What you'll need: - 3mm allen key - 3mm long allen key - 14mm wrench - 17mm wrench 1) First, you'll need to drain your boiler, and remove the panels from your machine. Keep tabs on the locations of all connection points, electrical or otherwise...
You'll need: - 2.5mm allen key - 13mm wrench - 14mm wrench First, you'll need to remove the top and back panel of the machine. Once opened, you'll also need to remove the water reservoir holder. This is fastened by two screws on the bottom of the...