Join Victoria as she demonstrates how to set up and dial-in the Eureka Zenith 65E Espresso Grinder. Step 1: Unboxing Your Grinder Make sure your grinder is stable on a level surface. Install the hopper and turn the grinder on using the on/off...
You will need to clear all the beans from the hopper/grinder and unplug it before doing this. Tools Needed: Small, medium, and large phillips head screwdrivers Checking the connections to the back of the faceplate. 1. Carefully peel back the...
Please read carefully before using the Eureka Zenith espresso grinder. If you have any other questions, be sure to contact us. Setup Video Grind Adjustment The grind setting of the Eureka Zenith 65E is adjusted by turning the small grind...
65 mm Flat steel burrs, 500 Watts, 1290 rpm Insert the hopper in the top of the grinder and open the tab at the bottom of the neck. You are ready to fill your hopper with beans. You may lock the hopper into place by tightening down the flat head...
Tools Needed: Phillips screwdriver Compressed air/keyboard cleaner/vacuum Small brush/implement to loosen up stubborn grounds 1. The recommended first step with a jam on any grinder is to go a rotation on the adjustment knob towards coarse and try...
Tools needed: Large phillips screwdriver Small phillips screwdriver Brush (for cleaning) 1. Carefully peel back the sticker on the top of the grinder to reveal the small screw hidden behind it. Remove the screw and you'll be able to move the panel...