Below is a photo for draining the boiler on the ECM Classika. To do this allow your machine to heat up to temperature for brewing espresso. At that point unplug the machine and remove the water tank. When the tank is removed you can tilt the...
If your ECM Classika begins to leak from the steam wand even when it is closed OR if you cannot get any steam out of the steam arm, you may need to replace the gasket on the inside of the steam wand. The steam arm gasket can fail if the machine is...
Use the following steps to remove panels from your ECM Classika. Make sure your machine is unplugged and cool before attempting. Tools needed: 3mm allen key 2.5mm allen key Start by removing the top cover, drip tray, and water tank. Next, lay the...
Before doing this you will need to remove the panels from the machine. Watch our video and see step-by-step instructions in our EMC Classika Panel Removal article. Tools required: 3mm allen wrench adjustable wrench
Water Tank Connector Instructions