Tools Needed:- 10mm crescent wrench- 13mm crescent wrench- PTFE tape- Optional: slip-joint pliers or similar1. Start by removing the panels from the machine.2. Identify the brew pump.3. Disconnect the braided line from the brass elbow with the...
Tools Needed: Phillips screwdriver 17mm wrench (a 17mm crow's foot and ratchet may be needed) Pitcher or similar vessel to catch water Siphon tool to remove water from the boiler. Be sure your machine is unplugged, completely cooled, and...
Tools Needed: Phillips screwdriver 17mm wrench (or crow's foot and ratchet if needed) Scouring pad or wire brush Teflon tape (if needed) Begin with your machine unplugged and fully cooled/depressurized. 1. Remove the top panel of your Silvia Pro...
You'll need: - Phillips head screw driver - 13mm wrench- Fingies-Towel (to catch any spills)- Replacement gauge (if needed)First, you'll need to unplug your machine and allow plenty of time for it to cool completely before you remove the panels...
Note: The instructions for backflushing your machine are also included in the User Manual, however, we have found that our version of the step-by-step written instructions is much easier to follow along with.You will need:- Backflush blank/rubber...