Rancilio Silvia Pro or Pro X: Replacing the PIDUpdated 5 months ago

You'll need:

- Small phillips head screwdriver

First, you'll need to remove the top panel from the machine. At the front of the machine, you'll see your PID box.

There are two screws on the back of the box fastening it through the front of the machine. Remove these two screws.

Slide the back casing of the box off over the length of ribbon wire

Pull the front of the PID panel through the front of the machine

Unplug the ribbon wire from the front half of the PID

Slide the back casing of the PID off of the ribbon wire.

To install your new PID, follow these instructions in reverse. If you have any questions, reach out to us at [email protected]