M4D / M7D: User ManualUpdated 6 months ago
Please read carefully before using your Macap M7D or M4D espresso grinder.
Setup Video
Grinder Diagram
Grind Adjustment
Grind adjustment on the M7D is accomplished using the the worm gear (H) located behind the grinder's hopper. Lower numbers indicate a finer grind and higher numbers indicate a coarser grind. This grinder is infinitely adjustable, so keep in mind that the numbers are simply a reference point.
Timed Dosing
The Macap M7D has 3 programmable timed dose settings. To alter these, press and hold the silver button above the display (C) until the "PROG." menu appears. Spinning the button allows you to choose between the 3 settings and pressing the button will allow you to edit that setting. After selecting one, spin the button to increase or decrease the timed setting. To save and exit press the button once more, then spin the button counter-clockwise until you reach "EXIT", then press again.
Technical Details
- 68 mm conical steel burrs
- Height without hopper: 15"
- Height with short hopper: 20"
- Height with tall hopper: 25"
- Width: 10"
- Depth: 14.25"
- Weight: 36 lbs
- Voltage: 110V
- Power: 800W
- Burr speed: 350 RPM
- Bean hopper capacity: 3 lbs (1lb short hopper available)
- Grinding output: 4.5 g/s
Additional Resources:
If you need help dialing in your equipment or pulling shots, check out the articles below or contact our coffee experts and technicians.