LUCCA A53 / Vivaldi: Replacing Coffee Boiler Temperature SensorUpdated 6 months ago

Tools Needed:

• Phillips Screwdriver
• Pick
• Heat Resistant Silicone Sealant

1. Remove the panels of the A53.

2. Unplug the wires of the temperature sensor by moving the orange sleeves up and pulling them apart.

3. Remove the old temperature sensor by using a pick to pull the silicone sealant out of the port.

4. Put the new temperature sensor in place, use a small dab of heat resistant silicone sealant to plug the port and then reconnect the wires.