LUCCA A53 Mini / Mini Vivaldi: Replacing the Pressure GaugeUpdated 5 months ago

You'll need:

- 7mm wrench or socket

- 13mm wrench (short)

First, you'll need to remove the front panel of the machine. 

You'll see the gauge is fastened by a small nut, with two connections coming off the back.

Using the 7mm socket or wrench, loosen that nut, and then remove it using your hands.

Pull the gauge off of the threaded post.

Use the 13mm wrench to loosen and remove the two brass nuts connecting the copper delivery tubes. Copper is a highly malleable material, so exercise caution when removing the nuts.

Pull the gauge free. Replace the gauge with a new one by following these steps in reverse order. If you have any questions, contact us at [email protected].