ECM V-Titan 64: User ManualUpdated 6 months ago
Please read carefully before using your ECM V-Titan.
Setup Video
Grinder Diagram
1. Bean hopper with lid (1000 g)*
2. Lock slide for bean hopper
3. Safety screw fixture
4. Coffee funnel with lid
5. Portafilter holder
6. Display / Timer
7. Adjustment for grinding level
8. Grind level indicator
9. Grinding button
10. On/Off switch
11. Catching tray for grounds
Grind Adjustment
Grind adjustment on the ECM V-Titan is accomplished using the the grind adjustment knob (7) located behind the grinder's hopper. Lower numbers indicate a finer grind and higher numbers indicate a coarser grind. This grinder is infinitely adjustable, so keep in mind that the numbers are simply a reference point.
Timed Dosing
Timed dosing is controlled by the small display located at the base of the grinder. To adjust one of the timed grind settings press both the plus and minus buttons at the same time. The display will then read "T1" in reference to the first timed dose setting. To edit the second timed dose setting first press the minus button. The display will then read "T2." To edit either press the plus button, then used the plus and minus buttons to alter the time of the setting. To save and exit simply wait a few seconds and the display will return to the menu. Press the minus button to cycle out of the menu and back to the home screen.
The timed doses are accessed by use of the grind button (9). To use the first timed setting simply tap the grind button once. To use the second, double tap the button. To grind manually, press and hold the button. After about one second it will begin grinding. Release the button to stop.
Technical Details
For a complete list of technical details, please see the spec table on our product page.
Additional Resources:
If you need help dialing in your equipment or pulling shots, check out the articles below or contact our coffee experts and technicians.