ECM Synchronika: Expansion Valve Adjustment and Seat Replacement (pre-2021 machines)Updated 5 months ago
Before attempting this we recommend allowing the machine to fully cool off, unplugging it and removing its water source.
Tools needed:
- 2.5mm allen wrench
- 1mm allen wrench
- Flathead screwdriver
- New Expansion Valve seat (if needed)
First, remove the panels from the machine.




At this point, you can reinstall the expansion valve adjustment screw and set screw. Once installed verify that the expansion valve adjustment screw is properly tightened down by backflushing machine and checking for leaks. If machine is leaking out of exhaust port while backflushing, tighten down the expansion valve until it no longer leaks during backflush.